Chapter 75: Bomb Disposal
The weapons of mass destruction that had been brought back from Japan after so much painstaking efforts were finally put on the experimental bench. However, the people standing around were all isolated ten meters away, and everyone had a telescope fixed on their head. The thing is used to observe the weapon of mass destruction more than ten meters away, and the specific operation is completed through several sets of mechanical arms hanging on the roof.
This robotic arm is not a computer-controlled robotic arm. It is a linkage mechanism composed of ordinary levers, gears and springs. The operator puts his hand into a robot-like glove here, and then the robot arm over there will move as he moves. It's just a very ordinary mechanical transmission, but the precision we do is quite exaggerated.
The reason why we have to separate the researchers so far from the large-scale destructive weapons in front of us this time is actually for safety reasons. After all, the things in front of us are too dangerous, so our temporary laboratory has made some special protection for this purpose. What supported the weapon of mass destruction was not a simple workbench. There was actually an empty space underneath the weapon, with a vertical well that penetrated the earth's crust and penetrated deep into the mantle.
Once there is an accident with the weapon of mass destruction in front of us, the entire test bed, including the three surrounding crystal walls, will drop to a depth of less than 2,200 meters underground within five seconds. In that kind of place, Even if it does explode, it will never hurt anyone. This is the best protective measure we can think of now, and generally there will be no problem. The only thing we have to worry about is if the outbreak of this thing is an instantaneous outbreak with zero delay. Then we can only hope that the three-layer crystal wall can last for more than one second.
"Should we start dismantling it now?" a player doing research asked.
"Wait a moment." The voice of an NPC scientist came from a crystal communication machine next to him: "I just heard from the guild administration department that the president will be coming to your place later. You guys wait first. For a bar."
"No need to wait, I'm here." While several people were talking, I just opened the door and walked in.
Several researchers briefly greeted me, and then one of them began to ask: "Can we start now?"
I nodded and said, "Then what are you waiting for?"
After listening to my words, several researchers quickly ran to their respective operating positions and put their hands into their operating gloves. After trying to move his fingers, the robot hand on the opposite side immediately started to move accurately, just as convenient and flexible as the researchers' own hands.
"Okay, get ready to start." The most skilled of the group of researchers stood on the central console and said.
Several player researchers around him immediately nodded and began to focus entirely on the weapon of mass destruction in the center. The researcher in the center operated the manipulator to pick up a cross-shaped screw turner on the table next to him, while ordering several other people: "Help me keep an eye on the status monitor, and tell me immediately if there are any changes."
"Okay. Just dismantle Goldfinger, and we'll monitor the status for you."
After receiving the answer, the person in charge of the operation began to concentrate on controlling the robotic arm. First, he used the screw spinner to aim at the screw hole on the side of the weapon of mass destruction and pressed it. Then he shook the handle behind the spinner and the front end rotated. The head immediately began to spin, and as the rotating head rotated, the screw quickly retreated from the screw hole at a speed visible to the naked eye. Finally, it was completely separated from the main body and removed.
In fact, this kind of screw spinner has the same function as a screwdriver. The difference is that this thing can remove screws much faster than a screwdriver. And more importantly, this thing does not require frequent impact on the screw interface. For some equipment that requires high precision, a spinner is obviously more useful than a screwdriver.
There are not many screws on the weapon of mass destruction on the operating table, but each screw is very long and fixed very tightly. It may not be possible to get it out with an ordinary screwdriver.
After quickly removing a few screws in a circle, the operator immediately used a suction cup to suck several parts of the outer casing and pulled it out with force. A relatively large metal plate was immediately removed. Several researchers nearby He quickly helped to remove several connected metal plates next to this metal plate. The shell of this weapon seems to use a design similar to the Luban Lock. Except for the first metal plate, which is fixed with screws, the remaining metal plates are all pressed underneath by this metal plate. The fixing parts at the back are also nested one by one and are all stuck together. As long as the first piece is removed, the back parts will fall apart on their own.
"How could it be such a design?" A researcher asked in surprise as he looked at the metal shields scattered on the ground. Just when the first researcher took apart the protective plate, they immediately discovered that other protective plates began to loosen. So he quickly used his robotic arm to help hold the guard plates. Who knew that before he could hold the entire missile body, it had already disintegrated and fell to the ground with a clatter. The entire internal structure of the missile body was completely destroyed at this moment. exposed to the air.
Several researchers nearby were dumbfounded when they saw the shell guards all over the floor. They just removed a fixed plate, and they didn't expect such a reaction.
"Could it be designed like this on purpose?" I looked at the researcher over there and said, "I've seen live ammunition shooting scenes before. When this thing explodes, it will spread a kind of particle light particles around. Could it be because of this? The thing itself needs to spread out and erupt, so a shell is installed that can be easily shed quickly?"
After hearing my reminder, several researchers over there also began to think, and then nodded and said that it was probably what I said. After all, the way this thing explodes is a bit like a cluster bomb, and particle dispersion needs to be carried out before the actual damage can occur. , in this process, the shell will only hinder the work of its internal components, so the entire shell must be dropped off in a very short period of time, and this nested shell is obviously very suitable for use in this situation. Because it can easily disintegrate the entire shell. As for the strength of this shell, I don’t think this is a problem at all. This thing is a weapon, not armor. The only function of its shell is to prevent the internal structure from being collided during transportation and launch. This kind of shell is not used for protection at all. Considering the size of this thing, even if it is a solid metal rod, it is definitely easy to be damaged, so for it. Protection doesn't really matter.
After understanding the design of the shell, it is time to dismantle the real missile body structure inside. The internal structure of this thing is quite complicated, using a large number of metal screws and magic fusion agent for connection. The screws are easy to handle, just unscrew them, but the magic fusion agent is troublesome.
The properties of this magic fusion agent are somewhat similar to model-specific glue. People who have played with plastic assembled models may know that there is a special glue for models. This kind of thing itself has no stickiness, it will not stick other things together, but this thing can easily make plastics stick to each other. In fact, this glue does not stick two pieces of plastic together at all. It melts the plastic surface it comes into contact with, and because this model-specific glue is relatively volatile. Wait for it to evaporate naturally. The dissolved plastic solidifies again and becomes a whole. It's like two pieces of ice. You press them together, then use fire to melt their contact surfaces, and then freeze them. When the melted ice freezes again, the two pieces of ice become one piece of ice, and there is not even a seam. Not found.
This magic fusion agent has similar abilities. As long as they are of the same kind of substance, it can quickly connect the two together. Even if you use an ultrasonic flaw detector later, you will not be able to find any traces of the connection. Of course, although the internal integration is very thorough. However, the outer joints will be somewhat uneven due to the softening process during the connection process, so it is not difficult to find the connection point. The difficulty is that this connection point is not much different from a whole piece of casting. Even if you Even if you find it, there's nothing you can do with it.
Although our technicians quickly removed all the screws, the connection points connected by the fusion agent gave us a headache for a long time. Finally, an NPC technician who used a communicator to remotely observe the disassembly process came up with the idea. Method. The method he proposed is actually very simple, which is to let the gold-eating insects eat away these connection points.
Compared with our instruments, gold-eating insects bite more quickly and accurately, and they will never bite things they shouldn't. We must know that these seemingly seamless metal structures are actually not completely solid. Some steel beams and the like have holes in them, and there are wires and other things in these holes. If we let It will definitely not be a problem to install the equipment and remove the steel beams, but there is no hope that these wires will stay, and they will definitely be cut off together. Therefore, we can neither damage the wires nor cut the steel beams, so we have to rely on the help of the insects.
Next to Steel City is our guild's Zerg breeding base, and the gold-eating insects have been helping us mine the steel in Steel City, so it is very simple to get a few over.
With the help of gold-eating insects, the steel beams were quickly cut open, and then the researchers carefully combed through the lines to find the source bit by bit and divided the uses of various instruments. If it can be dismantled, we will dismantle it and study it. If it cannot be dismantled, we will leave it alone. Finally, after eight hours of hard work, the original whole weapon of mass destruction finally turned into this big weapon in front of us. Stack of parts.
In fact, these are not basic parts. The pile in front of us should be said to be only the partitions that we can initially disassemble. Some parts are actually a combination of many things, and there are even parts with different functions connected together that have not been disassembled. However, because I don’t know how to dismantle them or I don’t dare to dismantle them, so I don’t move these things.
"President, that's all we can do right now." Several researchers who were almost exhausted were sitting on the ground without any image at this time. Even though the thing in front of you is so big, its power is equivalent to that of a small-yield tactical nuclear bomb. If it were you and you were asked to dismantle a nuclear bomb, would you feel no burden? Because of the burden, these researchers could be said to have been in a state of high mental stress during the entire dismantling process. It was just like a doctor performing an operation on the operating table, and someone could be killed if they were not careful. However, if something goes wrong with the doctor, it is not him who dies, but only one person. If something goes wrong with them, not only will they die with him, but also how many people around him will be implicated, so the psychological burden on these researchers can be said to be The burden is greater than when the doctor performs surgery.
Looking at the tired researcher who seemed to be about to fall asleep at any time, I quickly comforted him: "It's okay, as long as it can be dismantled here, you all go to rest first, and I will arrange the rest."
"Okay, President." Several people answered and walked out like walking zombies. Even if they wanted to rest, they couldn't rest here. It would be better to go back to Essinger and use their own advanced sleep system to assist them in sleeping. That thing is much better at assisting sleep than sleeping in reality.
They went to rest, but I couldn't run. I still had to deal with the mess in front of me. First of all, the pile of things piled under the operating table must be removed first. These are the metal keels and some integral castings without internal structures in the weapon of mass destruction. These things occupy a large portion of the interior of the weapon of mass destruction. The proportion is very large, but in fact it does not have much technical content, and it is also very safe. In the past, because they were bundled with weapons of mass destruction, they could not be messed with. Now that they have been dismantled, of course they can be sent directly to the New World Research Center for analysis and research. These things will not explode anyway.
In addition to these fixed metal parts, there are some functional parts inside this weapon of mass destruction. These are used to control or operate this weapon of mass destruction and have no direct relationship with its lethality itself. Therefore, they can be regarded as safety parts. These things can be transported away and studied slowly, and there is no need to continue studying them in the high-risk laboratory here. Although our guild temporarily built such a research laboratory here for this dismantling, it is a temporary thing after all. Various experimental equipment and personnel are not enough. Besides, it is too dangerous here. Those in our guild I don't dare to let senior NPC researchers come over, so in order to speed up the research progress, I still have to send things over for research.
After removing all the non-explosive or non-lethal parts, there were only two items left on the test bench.
"Is this the explosive component?" said the researcher who remotely observed the operation console through the communicator.
I stood in the position of the previous operator, took his place and used those mechanical arms to grab the two devices that were connected in series by two supercharged magic wires, and then said: "Everyone, please pay attention, this large one on my left hand The thing shows a high-energy reaction, but perspective shows that there is only a liquid substance inside, without any mechanical parts. Although the thing on my right hand is small, its internal structure is very complicated. We suspect that this is a detonation device. The problem is The two are now connected, and we don't know how to separate them. Do you have any opinions over there?" rq! ! !