Chapter 36 Upgrade (Part 2)

"What are the coordinates?" Guo Tailai asked again.

"Control system upgrade conditions, obtain the data carried by the dormant nanorobot at the coordinates." The control system gave a detailed introduction.

Can you still upgrade? Guo Tailai was overjoyed immediately, as long as there are upgrade conditions, Guo Tailai doesn't mind working harder.

What changes after the control system upgrade? Guo Tailai didn't feel it.

"What's new after the upgrade?" Guo Tailai asked in his mind.

"Please explore by yourself." The control system gave Guo Tailai a rather speechless answer. This is not the first time. When Guo Tailai first got the control system, he didn't know what to do and had to figure it out by himself.

I don't care about other things, but Guo Tailai will definitely test the processing ability. This is the basis for him to have the qualification for insurance research and earn more than 100,000 yuan. Guo Tailai must confirm it first.

He was in Mr. Liu's workshop, and there were plenty of tools. He randomly found a piece of scrap steel and clamped it on the workbench. Guo Tailai started from the most basic filing, and experimented with the same process.

Steady, unprecedentedly stable. From the moment he picked up the file, Guo Tailai noticed the difference from before.

One hundred times the nano-robots brought Guo Tailai not only enhanced control of arm muscles, but comprehensive control of all muscles in the body.

During the processing, the whole body muscles are involved to bring stability to the hands, which is completely different from the combination of only the arms and a small part of the shoulder, back, and leg muscles. If the processing stability in the past can be 10, then it can definitely reach 100% now. Hundred.

As far as the file is concerned, after Guo Tailai changed to the finest file, as soon as he went down the file, others might just rub it in vain, without using much effort. However, with Guo Tailai's eyes, he could clearly see that the surface of the workpiece was precisely cut off by 0.5 microns.

Yes, the machining accuracy of the file has allowed Guo Tailai to reach 0.5 microns accurately, which can already exceed most high-precision CNC machining centers. Most of the few remaining high-precision machining centers can only do this. Maybe there are only a few of the strongest machining centers that are a little bit better than Guo Tailai's handwork, but Also extremely limited.

Next, try other tools in the same way. Except for the saw, which is unlikely to achieve high precision due to the working nature of the tool itself, all others have been greatly improved without exception.

Generally speaking, it is no problem that Guo Tailai can manually process to a processing accuracy of 0.5 microns.

Guo Tailai was even more surprised by another discovery that nanorobots can consume lactic acid produced during a lot of work and exercise.

When the crankshaft and blades were processed last time, due to time constraints, a large amount of lactic acid would accumulate every time it was finished. Guo Tailai's arms were so sore that he couldn't stand it. Afterwards, he had to take a lot of rest and massage to get rid of it.

The same symptoms appeared this time, and Guo Tailai also accidentally issued an order to clear lactic acid, and the nano-robots immediately started to execute it.

Nano-robots can burn fat to gain power, as can lactic acid, a product of incomplete metabolism. The only regret is that the number of robots is too small, only one million, and the huge lactic acid produced by muscle exercise cannot be eliminated in time. Relieves soreness, but cannot completely resolve it.

Maybe we can wait until the number increases again in the future? At that time, perhaps Guo Tailai will be a tireless person.

The consequence of increasing the number by a hundred times is that the rate of fat consumption under normal conditions has increased by a hundred times, which means that the weight loss effect has accelerated by a hundred times. If it used to take more than 60,000 years, now it only takes more than 600 years.

Of course, it can’t be counted like this. Guo Tailai can use nano-robots to control muscle movements to consume the fat stored in his body spontaneously. It’s just that he consciously controls the speed because he doesn’t want to lose weight all at once. Losing weight is no longer a problem for Guo Tailai.

Titanium powder is not safe in that sealed small test tube, and it might shatter if you are not careful. Taking advantage of Mr. Liu's workshop, Guo Tailai easily made a hollow steel necklace pendant, poured the rest of the titanium powder into it and twisted it, and took the trouble to create a stainless steel necklace. The pendant is hung around the neck, so it is safe.

In fact, the titanium powder stored in the body is enough to replicate hundreds of millions and billions of nano-robots, but who knows what will happen in the future, it is still safe to carry on the body and can be used at any time.

After finishing the necklace, Guo Tailai strolled slowly back to the dormitory full of joy. After playing cards and having dinner with his roommates to celebrate, he lay on the bed happily, looking forward to his beautiful life in the future, and fell asleep.

"I don't need to explain the principle of assembly stress, you should know it." The next day, Guo Tailai continued to learn assembly with Mr. Liu. Mr. Liu explained step by step. Guo Tailai had already learned the fastening of assembly screws: "Let's start with tightening The torque of the screw begins."

The precise alignment mentioned earlier is not difficult for Guo Tailai. The current accuracy of his binocular measurement allows Guo Tailai to do things even more accurately than when Mr. Liu was at his peak. Even for the most demanding assembly of cylinders and pistons that require tight seams and are vertical or parallel, Guo Tailai can handle them all at once. No need for multiple adjustments.

Today I talked about the connection and fastening part of precision instruments, which involves the degree of tightening of screws and tools with torque. If there are design and assembly requirements, naturally adjust the torque according to the design requirements, if not, you need to rely on experience to judge whether it is too tight or too loose.

The measurement of torque is naturally indispensable to the torque measuring instrument. The measuring instrument in the fitter workshop can already be accurate to 1 Nm. Guo Tailai worked tirelessly with the torque meter, then measured and felt it.

"Do you want to record the torque measurement effect?" After measuring the feeling no less than a thousand times, Guo Tailai suddenly received an inquiry message from the control system in his mind.

Sure enough. Guo Tailai did not hesitate to choose to record the measurement results. Presumably, being able to feel the force and measure torque with both hands is one of the new functions after the control system is upgraded. For a whole day, Guo Tailai measured and reproduced in the fitter workshop, and quickly mastered the torque control with 1 Nm precision.

Of course, the control of the strength of both hands and the extremely accurate measurement of the length of the moment arm are indispensable. Among them, a set of ordinary weights in the workshop also allowed Guo Tailai to feel the mass measurement with a precision of 1 gram stably with one hand.

"Sister, is there any accurate torque measuring instrument in the laboratory? How accurate are the weights?" The torque accuracy of 1 Nm and the mass accuracy of 1 gram were no longer satisfactory to Guo Tailai, so he went straight to the laboratory the next day to find Zhao Yanyan went to ask.