Chapter 3 Figure CNC (Part 1)

"Binocular 3D measurement mechanism?" Guo Tailai was confused for a while, what is this? But obviously, there is no explanation.

Thinking about the benefits he got before, Guo Tailai only hesitated for a second, and immediately agreed.

"..." Nothing happened, and Guo Tailai was confused again. What is this 3D measurement mechanism for binoculars?

However, Guo Tailai did not forget to check what those nano-robots were doing. Almost as soon as I inquired, I immediately knew why there was no response.

A thousand nanorobots are moving along the blood vessels to the eyes. It will take at least tens of seconds to arrive, why is there no response?

This also made Guo Tailai's demand for titanium powder more and more urgent. He had to get titanium powder as soon as possible and increase the number of nanorobots, otherwise, the efficiency would be very low!

"Start the binocular 3D measurement mechanism." A prompt appeared, and Guo Tailai immediately felt that there seemed to be some changes in the eyes.

It was very itchy. Guo Tailai closed his eyes and rubbed them vigorously. When he opened them again, he found that his vision was a little blurry, accompanied by waves of distortions, which was very uncomfortable.

"Lens focal length misalignment, should it be repaired?" A question immediately appeared in my mind.

Lens out of focus? Isn't it myopia? Said so fresh and refined. Would Guo Tailai still disagree? Who is willing to keep holding thick glasses when sweating profusely?

"Completely take over and control 1%, 2% of the ciliary muscle of the left eye..."

...

"Complete complete takeover of control of the ciliary muscle of the left eye."

What is the root cause of myopia? Isn't it because the ciliary muscle can't adjust the lens normally, which makes the lens thicker, so that external objects can't be imaged on the retina? Therefore, the root of everything is because of the ciliary muscle.

The nanorobots immediately began to adjust the ciliary muscles, which surprised and delighted Guo Tailai. If you can take off the glasses you have worn for more than ten years, it will definitely be a great thing.

"Ciliary muscle control simulation adjustment 1%..."

Guo Tailai's vision began to change constantly, sometimes blurred and sometimes clear. In this situation, Guo Tailai couldn't work, so he could only sit and rest.

Fortunately, it was almost time to get off work. After a while, Guo Jianjun got off work and took Guo Tailai all the way home. Guo Jianjun was very satisfied with Guo Tailai's sweaty day. It is not necessary for Guo Tailai to lose weight immediately, but at least he must have this idea and action.

On the way, Guo Tailai casually talked about titanium alloys from processing materials such as stainless steel and cast iron, and asked if he could get a piece of titanium alloy for fun because he was curious.

"Titanium alloy? There is no such thing in the factory." Guo Jianjun is very interested in processing materials, and one sentence blocked Guo Tailai's way to find a way from the factory: "It is said that the whole country only produces a total of one or two thousand tons a year. , all kinds of research institutes and special material factories can’t get enough food, how can we have such a small factory?”

Guo Tailai gave up, let's see if there will be a state key laboratory in the department when the semester starts in September! Holidays can only be spent in "weight loss".

Too tired today, mainly because of eye discomfort, Guo Tailai washed up early and lay down after eating.

...

"The ciliary muscle control simulation adjustment is 100%, and the ciliary muscle control simulation adjustment is completed." An unexpected news made Guo Tailai feel better quickly. The simulation is completed, so the next step is to actually adjust it?

"Stop controlling the ciliary muscles."

"Re-establish biological reflection 1%..."

...

While re-establishing the biological reflex, Guo Tailai fell asleep, snoring loudly.

"100% biological reflex is re-established, and the adjustment of the ciliary muscle of the left eye is completed."

"Comprehensively take over and control 100% of the right eye ciliary muscle, fully take over and control the right eye ciliary muscle to complete."

"The ciliary muscle control simulation adjustment is 100%, and the ciliary muscle control simulation adjustment is completed."

"Stop controlling the ciliary muscles."

"100% biological reflex is re-established, and the adjustment of the ciliary muscle of the left eye is completed."

"Start the binocular 3D measurement mechanism successfully."

When Guo Tailai woke up, before he opened his eyes, he saw this series of reminders in his mind.

The nano-robots are so nice and hardworking. When Guo Tailai was sleeping, they were still working hard.

The binocular vision has been adjusted, and what binocular 3D measurement mechanism has been activated? Guo Tailai opened his eyes in surprise.

Swish, an incomparably clear field of vision was presented directly in front of Guo Tailai's eyes. Guo Tailai can swear that this is the clearest world he has ever seen in his life.

In the past, Guo Tailai didn't understand what it means to show every detail, but now Guo Tailai knows it. It means that he can clearly see the cotton fibers on the cotton T-shirt his mother put on the bedside.

About dozens of the thinnest fibers are twisted into a thick fiber, and then the thick fiber is woven into the fabric of the T-shirt. Each of the finest cotton fibers has an average diameter of 30 microns.

"Well, the diameter of this root is 30.2 microns." When Guo Tai finished speaking this sentence to himself, he was suddenly stunned. When can my own eyes see micron-sized cotton fibers? And can it accurately measure the diameter?

He looked up and looked into the room.

"The height of the door frame, 2000.9235 mm."

"Door frame width, 900.0855mm."

"Table height, 750.3827 mm."

"Table length, 1200.2712mm."

"Table width, 800.2636mm."

When looking at other things in the room, the size of this thing naturally appeared in his mind, which made Guo Tailai startled. Immediately understood, this should be the binocular 3D measurement mechanism.

It turned out to be such a fun thing, as long as you can get the precise size by visual inspection, you can measure it to the micron without using any measuring tools, and you can even estimate it to 0.1 micron, which is amazing!

After a few moments, Guo Tailai figured out the purpose, as long as he wants to know the size, he can know it when he sees it. What I don't want to know can be completely blocked. This measurement mechanism is still actively controlled by myself.

Such a magical function, used in the processing and manufacturing industry, is simply an artifact! I don't know if it can be measured more accurately.

"To improve the measurement accuracy, please use a more accurate measuring tool to calibrate." Guo Tailai got the answer as soon as he had this idea.

It turned out that because of the measuring tools, Guo Tailai only used a dial indicator in the factory, which was accurate to the micron, so he could only measure to the micron accuracy. When you go back to school and calibrate with the precise measurement tools in the laboratory, the accuracy can be higher.

Even if the accuracy is only micron level, Guo Tailai also realized that he seems to have become a humanoid high-precision measuring tool. He can accurately measure the distance between any two points he wants to know at a glance with his eyes, which is simply amazing.

With every detail revealed, Guo Tailai's life seems to be getting more and more interesting.