Chapter 1354 Installation (Part 1)

Seeing that Guo Tailai put on a pair of rubber gloves, picked up a few small parts and started to assemble, Academician Han and the two experts stared wide-eyed. What are they going to do?

Guo Tailai's hands were really too fast, they had just reacted, Guo Tailai had already assembled a blade, and even tightened the connecting screws.

"Stop! Stop! Stop!" Academician Han's heart was about to pop out of his chest. Isn't this a waste of things? Such a new and good engine, just mess around like this: "The screws that fasten the blades have torque requirements!"

"I know, the requirement for this part is 1.2 Nm." Guo Tailai replied casually, and then pointed to a pile of cabinets next to the wall of the studio: "There is a torque screwdriver there, you can measure it. In addition, dismantling I recorded the torque of each part during the solution, and it will not be wrong.”

The youngest expert ran over without even thinking about it, and quickly picked out an electronic torque screwdriver with an LCD screen. When he was about to measure, he found that just as he was picking tools back and forth At that time, Guo Tailai had already assembled five blades.

General Chu, Academician Han and another expert stared dumbfounded at Guo Tailai's hand assembly as if played at double speed in a movie. Everything in his hand was as stable as if it had taken root, and Guo Tailai's movements were also precise. Surprisingly, the tool in his hand has been screwed in precisely when others have to see the screw hole is aligned.

"Don't look at it!" Guo Tailai did not forget to remind the younger expert: "For the ones that have been completed, the torque of the screws is all 1.2 Nm, and the error will not exceed one millionth. .”

Except for General Chu, no one believed it at all. The young expert took a blade that had already been assembled and measured it carefully. It was indeed the figure that Guo Tai said, and there was no difference. The young expert was taken aback for a moment, then took the second one, and after measuring it, it was still the same. After five consecutive measurements, all of them were the same. And within the time he measured, Guo Tailai had completed the assembly of seven individual blade structures. That is to say, the time to measure the screw torque is faster than the measurement.

"The dimensional tolerance of the assembly should also be within 10 microns, but the engineers of their original version were a little perfunctory, and the installation in several places was not so standard." Guo Tailai's words did not stop when he was working: "Maybe It’s because I think it’s going to be sent to our country, so it doesn’t matter if it’s a little bit worse.”

When everyone saw with their own eyes that the screw that Guo Tailai twisted twice with a torque screwdriver was so accurate that it was unbelievably accurate, no one said anything, just listened, and sometimes bowed their heads to record.

"Don't remember." Guo Tailai saw it, and reminded directly: "I have already drawn the whole set of drawings, and the installation specifications have also been prepared, all of which are marked in detail, and I can just take it away when the time comes."

Less than ten minutes ago, Academician Han was still suspecting that Guo Tailai claimed to have finished drawing all the pictures in just one day, which was perfunctory and foolish, but now, he wished that Guo Tailai had finished all the drawings. Because from the beginning to the present, the data Guo Tai talked about was a little bit of experience that they had spent more than ten years groping for before, but it only took less than a day for Guo Tai to come here.

Within fifteen minutes, the four watched as Guo Tailai started to assemble the first impeller. And then the second, and the third... and all the way to the last. Next is the engine casing, the main shaft, several thin shafts, connected to a series of blades, fuel injection pipes and nozzles of various lengths and thicknesses, connected in series in sequence, and most of them are repetitive tasks.

While repetition may seem simple, achieving assembly precision is not so easy. For normal assembly, it can be said that each blade needs to be measured and adjusted many times. How can it be as easy as Guo Tailai? In the eyes of many senior engineers, the assembly work needs to be very patient and careful. For Guo Tailai, it is as simple as building Lego blocks. However, the things he built casually, measured with various fine tools, and found that the measurement accuracy is even more accurate than the most accurate tools that can be used here. How can there be any reasoning?

"The processing of these parts, our current processing capacity, should also be able to make them." Guo Tailai hardly stopped talking during the work: "The only thing that is missing now is the material. However, the problem of materials It is not something that can be solved right away, so we can only take it slowly. If others can use it for 5,000 hours, we will use it for 500 hours first. If there is no problem, let’s keep improving. Moreover, materials rely on accumulation. This point must be clearer to several teachers than me. I can only provide a little help in processing and assembly, and I really can’t help much else. "

General Chu looked at his watch. It took three and a half hours from Guo Tailai's installation to now. Guo Tailai's hands were always so steady, fast and precise, without any fatigue. The rhythm was almost more accurate than those of the drummers in the band. It's just this point, no one in China can match Guo Tailai, the most powerful fighter in the entire army, I'm afraid Guo Tailai can't hold a candle to Guo Tailai in this aspect. Master, not without reason.

However, Guo Tailai was standing on the other side of the platform made up of the table, constantly operating with his hands and explaining in his mouth, while the three experts headed by Academician Han on the opposite side had no time to come. The kind of heartache, leaving only a humble and studious focus, wishing to record everything Guo Tailai explained, and Guo Tailai always reminded them not to memorize, he had already written detailed operating procedures.

There is something unclear in the middle, as long as they ask, Guo Tailai will immediately explain in detail. Academician Han and the others are indeed experts in this field, but in terms of processing and assembly, they can't even see Guo Tailai's taillights.

When it was almost four hours, Guo Tailai clapped his hands, then pointed to both sides. When everyone looked at it, they realized that the tiniest parts on the platform that Guo Tailai disassembled neatly had all disappeared at this moment. In other words, all of them are installed in the turboshaft engine in front of us. According to their observation of Guo Tailai's assembly process, there was neither an extra small part nor a small part missing, just right.

"Actually, there are too many." Guo Tailai smiled and pointed to a few small devices on another platform: "I won't put those self-destruct devices in there. After watching for so long, are you hungry? Let's go." ,go for meal!"