Chapter 260 [Samples Produced by the Plastic Products Factory]
After staying at home for five days, Belsinger hurried to the town, and then took Will and ran to the Singer Industrial Park. After a month of construction, the plastic products factory built by the Singer family at a high price was successfully debugged and samples have been produced.
The plastic products factory is related to the foundation of the Singer family, and it cannot be sloppy. Although the factory building has been built, it has not been further decorated. It is all red bricks and cement windows. The machine was successfully installed and tested under the debugging of the German workers, and the first batch of samples was produced today.
This is a good day for a good start. I am fortunate to have this boss to watch the first batch of samples on the spot. At 10 o'clock in the morning, all the leaders of the group were in place, and the workers from other factories who came to watch the excitement were also around.
After detailed debugging, the German engineer captain, after instructions, got Belsinger's consent. Only then did the first batch of raw materials pour into the machine for heating and film blowing. The first batch of products produced were plastic tableware, and plastic tableware is not disposable, but permanent tableware products.
Including plastic plates, plastic bowls, plastic cups, and plastic kettles, all in red. After all, Indians like bright colors, red and yellow are their favorites. With the normal operation of the machine, the temperature in the entire factory soared.
Because the plastic particles need to be heated before they can become liquid, and then poured into the mold for squeezing, so that a plastic plate can be formed. To be honest, the plastic products produced in this way will be found to be very large, and a pungent smell can be smelled in the field. These pungent smells are toxic and harmful substances.
It will definitely have an impact on the body over time, but now it can't care so much. If you can't even eat enough, how can you care about your body? So the workers don't care, and now it's 2001, where are those environmental protection systems. After being heated by the machine, the melted plastic particles come to the film blowing stage, and a small piece of liquid plastic is blown into the mold through the connection of the pipeline.
In less than a second, the plastic plate in the mold has been formed, and then after 30 seconds of cooling, the film is opened. A red plastic plate is officially formed, the surface is very smooth, and the temperature is still hot. The worker wears gloves and takes the plastic plate off the mold. Cut off a small piece of plastic connection behind the plate, and then after a little grinding, a plastic plate is officially formed.
The thickness of the plate exceeds five millimeters, and it makes a bang when knocked. The hardness and strength have reached the perfect standard. In addition, the surface is smooth, the color is bright red, corrosion-resistant and high-temperature resistant, and it is not afraid of falling or collision. It is much more durable than those white porcelain plates, but as the use time increases, the toxic and harmful substances in it will slowly evaporate, which is not so good for the body.
But it wins in terms of high quality, low price, and durability. Belsinger took the plate in his hand and observed it carefully. It is perfect. The surface is very smooth, and it can reflect the subtle parts of the face. The diameter of the plate exceeds 20 centimeters and the depth is two centimeters.
The edge is very smooth. By modifying the shape of the film, it can also produce triangular, square, or even wavy edges. It only depends on what shape of plate the customer needs. After the plate is produced, the red plastic bowl is produced, and then the red plastic water cup is produced.
There are 200 products in total. Only then will the machine stop working, and the 200 products are placed in front of everyone. The production process has not exceeded half an hour, and the work efficiency is not low. The products produced are very perfect, which can fully meet the standards required by the market, and even better.
The production cost of such plastic plates does not exceed ten rupees, but the selling price reaches 50 to 100 rupees. It is equivalent to less than ten yuan in RMB, and the plastic bowl is slightly cheaper because of its small size, and the overall profit is 60%. How much the second-hand dealers sell each is their business, and the wholesale price is set at 70 rupees.
The price is very cheap, and it will definitely sell well. After seeing this batch of perfect test products, the people present began to cheer loudly. Especially the workers in the plastic factory, they were so excited that they shouted and screamed. To be honest, if the plastic factory produced the most perfect plastic products, they could find a market. Then they increased production. Their wages were all piecework wages. How much money a person earned based on how many plastic houses he made in a day. How could they not be happy?
German machines are good, strong, durable and simple in structure. Bersinger ordered on the spot that the machines that had been turned off should be restarted. One hundred pieces of each plastic tableware in different colors and shapes were produced as exhibits to their customers so that they could choose what kind of products they liked, and then take orders for production.
When the plastic tableware reached perfection, other plastic product machines were also debugged and samples were planned to be produced. Let your boss watch, for example, a machine that produces plastic barrels produces two halves of plastic barrels, and then heats and bonds them together in the middle.
After polishing, a plastic barrel that can hold five kilograms of liquid was produced, and it can be stored after the lid is put on. In addition to the five-kilogram specification, there are also several specifications of ten kilograms, 25 kilograms and 50 kilograms.
Whether these plastic barrels are used to hold water, other liquids, or cooking oil, they are perfect containers. They are easy to carry, strong and durable, and most importantly, they are cheap. In addition to these, they can also be used to make plastic bags, plastic sheets, and even plastic sheets used in plastic greenhouses.
Moreover, the production cost is very low, and the profit margin of the sold price is more than 50%. Every time the most perfect product is produced, it has been unanimously affirmed by the senior members of the Singh family. Yes, the machine is expensive, but the products produced are indeed good and the appearance is quite good.
The quality is particularly strong. There are 20 machines debugged today, which can only produce less than 150 kinds of plastic products. But it is enough to form a scale of an exhibition hall for plastic products. As time goes by, there will be more and more debugged machines, and the variety of products produced will also increase, reaching more than one thousand kinds in total.
Of course, it is impossible for each of these more than one thousand kinds of plastic products to be produced at full power. There are best-selling products and unsalable products. It's just that these products are produced to form an exhibition hall for plastic products, allowing those customers to choose freely, and then place orders for production. Without orders, no plastic products will be produced.
But they all cost money, so why produce them if they can't be sold? When he got these perfect plastic products in his hands, Bellsinger was so excited that he almost cried. He stayed in the factory of the plastic products company for a day, waiting for the arrival of new products.
No mistakes in one post, one content, one book, one forum, one 6, one 9, one book!