Chapter 689 More Advanced Lithography Machine

Regarding the matter of smearing China, some foreign media are really black for the sake of black, and they don't care about the authenticity of the news at all.

What they need is hotness, and what they need is attention.

There is not much to say about these media.

Mouth on other people, unless you can kill them, otherwise, they are disgusting you.

This kind of thing is taken out of context, at any time.

Li Wenhao didn't know the outside media, because of the new materials they leaked, they had already been arguing.

But even if you know, it's no big deal.

He is noisy and he is noisy, and he does his own thing in peace.

After showing the new material, Li Wenhao continued to introduce after the others returned to their seats: "I believe everyone has seen this new material. If there is no question about the new material, then I will continue to introduce it. ."

Speaking, Li Wenhao looked around to see if there were any doubts.

I saw the others staring at him intently, but none of them said a word.

They are not really without doubts. As a new material, it is still a material that can be used to make chips. How can there be no doubts.

However, they also know that some questions are not suitable to be raised now. After the meeting, when the R&D work is officially started, it is not too late to discuss and study slowly.

After Li Wenhao explained the new material and then came up with the new material, everyone subconsciously leaned towards Li Wenhao.

It's not that other colleagues are biased, and the two sides are not in the same grade.

If Li Wenhao just briefly described the plan, everyone might still be inclined to Wang Dequan. After all, the 5-nanometer process given by Wang Dequan is a common practice in the world. The only difference is the difference in details.

Moreover, Wang Dequan has been researching the 5nm process at Huawei HiSilicon for a long time, and the 5nm process has a very high probability of being realized.

But all of this is based on Li Wenhao's inaction.

Now, the new material that Li Wenhao suddenly gave out is like when he was fighting the landlord. He just played the card, and a bomb came directly. Although it was not as shocking as Wang Zhan, it also showed that the card in Li Wenhao's hand definitely made the opponent desperate. card.

Li Wenhao has indeed not described how to use this new material to make a chip with a 60-picometer process, but now he is talking about a feasibility study plan, a general plan, and it will not be too late to study the details in the future.

Some people even think that maybe at the end of the story, Li Wenhao directly took out a 60-picometer chip, and they would not be surprised.

At this moment, they seemed to know how Li Wenhao solved the problem of precision.

With the material, how to make a "transistor" on this material is the most important and most anticipated thing.

Sure enough, after introducing the new material, Li Wenhao started to introduce the equipment problem.

Li Wenhao operated the holographic screen and turned it down.

Title: "On How to Make a Lithography Machine."

When everyone saw the title, they couldn't help but take a deep breath.

Holy crap, does this mean you want to make your own lithography machine?

Originally, everyone thought that they would buy EUV lithography machines from the Netherlands as chips for making 60 picometers. After all, this is the most advanced lithography machine at present. Apart from this, they could not think of any way to solve this problem.

But they never thought that Li Wenhao's ambition would be so strong, not only to come up with new materials, but also to make lithography machines.

Although I was taken aback by the title, I thought it was a bit of a matter of course.

Although the EUV lithography machine produced by ASML in the Netherlands is the top lithography machine, it is really impossible to make a 60-picometer chip.

Since even the top EUV lithography machine can't do it, can the lithography machine made by yourself be able to do it?

This question popped up in everyone's mind.

The production of lithography machine is not something that ordinary people can do. Even the EUV lithography machine produced by ASML in the Netherlands is not produced solely by ASML.

Such lithography machines cannot meet the requirements of making chips with a process of 60 picometers. Could the lithography machine made by Li Wenhao himself be able to achieve this function?

Or, like a new material, has a physical machine been created?

Thinking of this, the people sitting under the conference room looked at each other, and then looked at Li Wenhao with fiery eyes.

Not only them, but even Wang Dequan, who was sitting beside him, was full of eagerness in his eyes.

Li Wenhao was stared at by everyone, and his heart was straight. He couldn't help but joked: "Brothers, don't look at me with such eyes, I have no special hobbies, and my hobbies are normal."

Hearing this, everyone burst into laughter.

"As for the lithography machine I introduced, I haven't produced it yet, but I believe that after listening to my introduction, you can basically judge whether a similar lithography machine can be produced." Li Wenhao explained .

This brand-new lithography machine, but Li Wenhao was transformed from the classic models of the apocalyptic world, in order to be able to manufacture it at this point in time.

Of course, at this point in time, because of the lack of many materials, substitute materials are used.

This lithography machine is still more than enough to manufacture 60-picometer chips, and there is no pressure at all, but the cost will be higher.

Now the competition is in terms of feasibility, and it is normal for the cost to be higher.

If Holland ASML knew that Li Wenhao had such a lithography machine, it would have to be purchased even at a sky-high price. This is related to the future development of Holland ASML, and it is worth spending more money.

However, ASML of the Netherlands does not know that a lithography machine that is far more advanced than the EUV lithography machine is about to be born in this competition.

After waiting for the laughter for a while, Li Wenhao began to introduce the production of a new lithography machine.

Compared with the introduction of new materials, when Li Wenhao introduced the lithography machine, everyone was very quiet and focused, for fear of missing some details.

They know a lot about lithography machines, and they know very little.

They have a lot of questions, but they also know that these questions are not being asked now.

Without the questions from the people below, Li Wenhao explained much faster.

The whole person talked about it, and after 20 minutes, the lithography machine was finally introduced.

"Do you have any questions about the lithography machine?"

After the explanation, Li Wenhao asked a question habitually.

After asking, he had some regrets.