Chapter 1220

Remember our website, I wish you a happy reading! Don't forget to spread the word.

Chapter 1220

With the successful convening of the first Tiangong Conference, Chu Xingyun finally took over Tiangong Island.

From this moment on, Tiangong Island, Tiangong Craftsman, and all Tiangong Island residents have been branded with Chu Xingyun.

After the meeting, all the craftsmen dispersed and contacted the 100 sheds they were in charge of to convey the changes in Tiangong Island and Chu Xingyun's opinions.

At the same time, Chu Xingyun once again issued an order to select the most outstanding craftsmen from the residents of the island to form a research and development team to study the craftsmanship of new products.

For the selection standard, Chu Xingyun set it very high.

The first thing is to be young, and the age should not exceed 50. Too old craftsmen have hardened thinking and it is difficult to accept new things.

The second is to be knowledgeable, to read extensively, to memorize extensive knowledge, and to have the ability of photographic memory.

If these requirements cannot be met, it may be difficult to keep up with Chu Xingyun's progress, and sooner or later he will be abandoned.

Again, what is required is superb technology, painting, technique, and sculpture must all reach the level of a master.

If this requirement is not met, they will not be able to cooperate with Chu Xingyun's work at all. Even if Chu Xingyun arranges a task, they will not be able to complete it.

Finally, and most importantly, it is better to be patient and bear the burden of hard work. No matter how boring the work is, you can persist for a long time.

After strict selection, only thirty-six people were selected out of a million people, not one more.

These thirty-six people are the first batch, the real heavenly craftsmen!

The so-called one person counts the short, two counts the long.

After unreservedly passing the runes of the Galeful Golden Arrow to the thirty-six people, the next thing to do was repeated tests.

Although it is said that Chu Xingyun has completed all the designs, in fact...that is just a preliminary design drawing.

It is not so easy to implement it into mass production.

The so-called selection of the best, there is no best, only better!

The most important thing is that the previous Galewind Rui Jin Arrow was made of arrow wood, and it was divided into three parts: the arrowhead, the arrow shaft, and the arrow feathers.

But now, with Arrow Bamboo, the craftsmanship naturally needs to be improved.

The arrowhead was directly canceled, and the branches of the arrow bamboo were cut to become arrow shafts with their own arrow tips.

As for the arrow feathers, it can be replaced by bamboo leaves of arrow bamboo, and its performance is even stronger than that of goose feathers.

However, although it sounds simple, the first batch of arrows produced did not meet the requirements.

Abandoning the metal arrows caused the center of gravity of the arrows to shift, the arrows were too floating, and the flying posture was unstable, especially when the arrows fell from the sky, the tips of the arrows were not pointing downward at all.

Is it necessary to match the tip of the arrow? But in this way, the cost of the arrow will be greatly increased, and the whole process will be more than twice as cumbersome! Production speed is greatly reduced.

After repeated research, the counterweight of the arrowhead must be done, otherwise the head is too light, and the arrow will not be able to exert its power at all.

But the arrow is not necessarily necessary. As for how to solve this problem, it is what these thirty-six craftsmen who are really known as Tiangong have to study.

For these real Tiangong, Chu Xingyun's explanation is to simplify the process as much as possible, reduce costs and increase production on the basis of ensuring quality and performance.

After a lot of tests, finally... thirty-six celestial craftsmen jointly identified a set of plans.

Everything else remains the same, the only thing that has changed is that a lead pellet is stuffed into the bamboo pole at the tip of the arrow bamboo to adjust the center of gravity of the arrow.

The stuffed lead shot has many uses.

First of all, because the arrow tip of the arrow bamboo is made by obliquely cutting the bamboo pole, there is a cavity. After plugging it with lead shot, it can prevent debris from entering it and affecting the performance of the arrow.

Secondly, the lead shot is very heavy and very soft, which is very convenient to adjust the center of gravity of the arrow.

Thirdly, although the lead pellets are soft, they are metal after all, and under the stimulation of the sharp gold array, they can stimulate sharp arrows.

Finally, when the arrow penetrates the flesh, it bursts, causing lead pellets to enter the enemy.

Because the lead is relatively soft, it tends to release all the kinetic energy after hitting the body. The specific performance is that the warhead is severely deformed or even ruptured, resulting in a trumpet-shaped cavity in the body tissue, and the wound area is hundreds of times the cross-sectional area of ​​the projectile.

Coupled with the damage caused by the huge pressure on the body's blood circulation system in an instant... it is unimaginable.

The suffering of the wounded did not stop there, and if all the fragments of the projectile were not removed from the wound, then lead poisoning could result.

Even if there are relatively few fragments by luck, and they are removed through surgery, after the projectile is injected into the human body, some clothing fragments will be brought into the wound, causing infection...

It can be said that a small lead shot directly increased the lethality of the blast sharp golden arrow by ten times!

Although the speed and penetrating power have not changed, the addition of lead pellets has made the lethality of the arrows extremely terrifying.

Although only a lead pellet was stuffed into the tip of the arrow, the sharp golden arrow instantly changed from a sharp weapon to a murderous weapon! Extremely brutal and domineering.

If it is a war with the same kind, Chu Xingyun would rather lose than use this kind of weapon.

However, if the enemy is a monster race that feeds on human beings and is determined to exterminate human beings, then Chu

Xingyun doesn't mind using any weapons and methods.

After confirming the final manufacturing process, following Chu Xingyun's order, the entire Tiangong Island began to get busy.

If it is completely released and fully produced, 100,000 master craftsmen, 200,000 assistant craftsmen, 400,000 master craftsmen and apprentices, 300,000 old and young women and children, with a total of 1 million craftsmen working together, can produce 100 million in a day. Sharp arrows.

Of course, the arrows produced in this way must be shoddy. Although they can be shot, it is difficult to guarantee how the arrow will fly.

Bamboo is not as straight as wood, and it has some curvature, so if it is not handled properly, the arrow will draw an arc when it flies out, and it will not hit the target at all.

Moreover, what is being produced now is the Galewind Sharp Golden Arrow, which needs to accurately depict the runes, which is simply not something that apprentices and assistants can accurately complete.

To ensure the quality of the arrows, to ensure that each of the Gale Wind Sharp Golden Arrows is straight and accurate, and perfectly trigger the runes, only those 100,000 master craftsmen can do it in person.

With full cooperation, the unit is 100,000 work sheds.

Among the four apprentices, one of them is responsible for finding and collecting bamboo branches, looking for the straightest bamboo branches to collect.

The second apprentice is responsible for transporting the collected bamboo branches back.

The third apprentice is responsible for screening the collected bamboo branches, and removing those that are not straight and have defects.

The fourth apprentice is responsible for cleaning the bamboo branches and cutting them into rough arrow shafts.

Two assistant craftsmen, one of them is responsible for cutting qualified arrow bamboo branches, cutting out arrow tips, and inserting arrow feathers.

Another assistant craftsman is in charge of stuffing the lead shot and adjusting the center of gravity of the arrow.

After all this was done, the arrows were handed over to the master craftsman for the carving of the runes.

After the talisman was carved, a Gale Wind Sharp Golden Arrow was officially completed.

Every sharp golden arrow needs to go through the hands of four craftsmen and apprentices. After two assistant craftsmen make it, the master craftsman will carve the runes.

The finished arrows are handed over to the old, young, women and children in the shed for final inspection. After confirming that everything is correct, they will be polished, printed, bundled and decorated.

Galewind sharp golden arrows, ten into a bundle, tied with bamboo rope, handed over to the warehouse for storage, and exchanged for work points.

[Tip]: If you think this article is good, please recommend it to more friends! Sharing is also a kind of enjoyment.