Chapter 1131 Ask for Help!

In the huge workshop, no one spoke.

Kasore didn't even need to look back, he could feel a dozen scorching eyes from behind staring at him.

The first is to wait for him to make a decision.

Second time...

It is inevitable that there will be the intention to watch the fun.

After all, it was you who vowed to make all the big parts first and then concentrate on pre-connecting them, and there would be absolutely no problems.

And now, this three-centimeter-wide gap is right in front of you, how do you explain it?

No face left.jpg

Therefore, in just a few breaths, Kasolei felt like he was breaking out in a cold sweat.

In fact, before he returned to France, the two sides also discussed whether to send a team of Chinese engineers to accompany him.

However, from China's perspective, the entire process flow was designed by Liang Shaoxiu himself, and he even received some help from Chang Haonan during the process.

It is impossible for these two people to move away under any circumstances.

If you send other idle engineers, it will not solve any practical problems.

From Casore's point of view, he doesn't want to behave too much in front of his partners, so he hopes to return to China alone to complete the production tasks.

Therefore, this matter finally came to an end.

But now, Casore has never felt more regretful.

The result of insisting on saving face is that you will lose even more face in the end...

Fortunately, he has experienced many battles and has seen a lot.

Although he was extremely remorseful in his heart, he still acted like "everything is under control" on the surface. While he came closer and pretended to check the situation, his brain was running rapidly, thinking about whether there was any remedy.

After a few minutes, Kasore finally calmed down.

Although I am very reluctant to admit it, the fact is that in the past few years of cooperation with the Chinese, whether it was Rafale fighter jets or Falcon 8Z business jets, the other party had never made any particularly serious mistakes.

Therefore, the first thing he thought of was whether there was something wrong with the factory.

"Ciel, show me the production log."

Kasore turned around and ordered as calmly as possible.

Of course, a serious factory cannot mess around like a small workshop.

Every step of operation must be recorded accordingly.

"Here."

Bain took out the materials he had already prepared.

In fact, he had already checked the contents of the log.

After confirming that it was correct, I went to find Kasore.

Sure enough, the latter read it from beginning to end twice and found no problems.

And if nothing goes wrong at the operational level...

"Supervisor, can you determine where the problem lies?"

Someone in the crowd behind asked appropriately.

It's hard to tell whether the heckling was intentional.

Cold sweat flowed down.

But just when Kasore could hardly get off the stage, another voice suddenly came:

"Supervisor, the width of this gap from top to bottom is almost exactly the same. In fact...it doesn't seem to be caused by deformation of parts or flow of gaps."

This sentence instantly awakened him.

For parts with different specifications and locations, the allowance calculated before pre-connection is also different.

If there is a problem at the design level, it should be an uneven situation.

Unless a certain constant is missed during the calculation——

And this is obviously a bit outrageous.

Kasore turned back gratefully.

However, he discovered that the engineer who had just rescued him was the engineer who first asked him questions a few days ago...

For a moment, Kasore's heart was full of mixed emotions, and he didn't even know what to say.

It wasn't until about half a minute later that he spoke again:

"I'm going to report the situation to the design team. After all, it's the first time to apply a new process, so it's normal to have some problems... It shouldn't be difficult to solve."

…

In the evening French time, the corresponding capital time is exactly noon.

Therefore, the explanation of Kasolei's situation was almost immediately placed on Liang Shaoxiu's desk.

Looking at the photo in front of him, the latter only felt that his eyes were a little dark.

The reason why he gave this job to the French was to use this opportunity to conduct a technical verification and dig out the hidden dangers in the entire technology.

But the hidden dangers that Liang Shaoxiu had thought about were that the tolerances were found to be relatively large during assembly, or that the strength did not meet the expected standards during testing.

At most, it can be solved by manual rework.

But I never thought that the problem could be so big.

When Casore took the photo, he was afraid that there would be no reference object, so he specially inserted a vernier caliper.

Although I can’t see it clearly due to pixel issues, it must be about 2.8 centimeters anyway.

This is definitely not a problem that can be solved by hitting a hammer or changing the position of a few pre-connection points.

There must be something wrong with every preset unit, and finally it was concentrated and reflected on this crack.

What's even more troublesome is that because he was not at the scene, he could not conduct a more detailed analysis.

As for the ideas Casore proposed...

He first said that he had checked the logs and it was unlikely that there was a problem in the production and processing process.

I also think that the gaps are too smooth and neat, and it doesn’t seem like a problem in the design process...

It was as if it had been said.

Looking at Liang Shaoxiu with a gloomy expression, Ma Lin, the deputy chief designer sitting opposite him, tentatively suggested:

"Mr. Liang, based on my management experience in the workshop, the production log cannot be fully trusted... In order to fully understand the problem, I am afraid that we need to ask them to disassemble the assembled parts and then check each parameter and design requirement one by one to see if they are consistent..."

This generation of aircraft designers in China is very experienced in solving production problems.

After all, until Project No. 10, they had suffered a great loss in this regard.

It was the accident that almost destroyed an AL31FN that made the aviation industry system determined to vigorously rectify the non-compliant operation problems in the production process.

It has only been more than five years.

Liang Shaoxiu came from a small factory and knew all these clearly.

But if he really operated according to what Marin said, it would take almost half a month just to check.

It was a major blow to the entire "Gaoming" project.

It would be fine if it was put on normal days.

Anyway, the backup plan is always kept, and it is a waste of money at most.

But now is the key node to compete with David Country and prepare to fight for face without steaming buns.

If he failed, even if his superiors didn't say anything, Liang Shaoxiu couldn't get over it.

After thinking for a while, he leaned over and picked up the receiver of the red phone from the corner of the table, and then dialed a three-digit extension number.

"Hello, Xiao Liu, please help me arrange it..."

At this point, Liang Shaoxiu's voice stopped again.

A voice with doubt and anxiety came from the other end of the phone:

"Mr. Liang?"

When the second call came, Liang Shaoxiu came back to his senses:

"No need for now, you go ahead."

After that, he pressed the off-hook button at the speed of light, and then dialed a longer number again.

About ten seconds later, the call was connected.

"Hello?"

The person on the other end of the phone was naturally Chang Haonan, who was in Gaofa Group.

It was a coincidence that he had just finished a round of testing and returned to the office. He didn't even have time to drink his saliva when he heard the internal phone ringing.

"Hello, Mr. Chang, it's me, Liang Shaoxiu."

Although they were separated by the telephone line, Chang Haonan could still hear that the other party's tone was not right:

"What's the problem?"

And Liang Shaoxiu's answer was exactly what he guessed:

"Something went wrong in the pre-connection process of the back wall panel unit..."

"Dassault's production is indeed very fast, but during the assembly process, it was found that the units did not match each other, and a gap slightly smaller than 3 cm appeared..."

"The safest way now is to dismantle them all and re-check the production of each component, but I want to ask you... Is there any better way? I have sent you the situation report..."

Obviously, this is to call someone.

However, even Chang Haonan could not analyze the cause and solution of the problem just by listening.

So while he was talking, he quickly opened his internal mailbox.

"Don't worry, I'll take a look at the specific situation, tomorrow at the latest..."

Chang Haonan originally wanted to say that he needed a day and give a reply tomorrow.

But at this moment, he happened to see the picture attached to the report.

"Okay..."

Liang Shaoxiu was about to hang up the phone.

"Wait a minute, don't hang up yet!"

Chang Haonan quickly stopped the other party from ending the call.

"Tell Dassault to change the positioning method from N-2-1 to N-1-2, and then change the bandage clamping direction from horizontal to vertical to try."