Chapter 367 Aegis Machine!

Until then, Aegis Motor Company could be regarded as a large-scale automobile manufacturing company with fully independent R&D and manufacturing capabilities. Don't worry about being strangled by someone's throat and pinching your weaknesses.

Of course, what I am talking about here is only the three core components that are mastered and monopolized by a few manufacturers, especially several major auto groups.

As for other parts such as interiors, seats, lights, etc., which have little technical content and are relatively messy, they are still purchased from outside to save time and effort.

After all, Aegis Motor Company has only been established for less than two months, and its development has been very rapid. If the production of all components is completed by itself, it will need to purchase a large amount of equipment and hire more corresponding personnel, and the stall will be spread in a short time. If it is too large, it will bring bad influence to all aspects of management and production.

Moreover, the profits of these non-core links are not very high, so there is no need to spend a lot of time and energy on this, and invest a lot of money.

What Chen Mo wants to develop is a high-tech enterprise, not a labor-intensive electronics factory.

Therefore, all low-tech, low-profit and low-efficiency links will be produced by outsourcing procurement.

To make a car, there is no need to produce the screws yourself. As long as you master the most core technology and production links, you will not be held by the outside world, and you will not be caught in the neck. You can grasp the highest profit margin and production management efficiency. Some high investment and low return The unimportant part is completely unnecessary to do it yourself.

In addition to the adjustment of the various production departments of Aegis Motor Company itself, Chen Mo also separated some personnel from the original processing workshop, assembly workshop, R&D department and other departments, and established a new company separately.

Aegis Machinery Company!

After the production and construction of the previous automated production line, they already have the production capacity of mechanical equipment such as manipulators. This time the first phase of the industrial park is completed. Chen Mo, while adjusting the production workshops of Aegis Motor Company, simply separated the mechanical manufacturing part directly. It came out, and a new machinery manufacturing company was established in the reserved new factory area.

Chen Mo is not as simple as simply splitting the original production workshop into two parts.

Since Chen Mo took over the car company, the company's personnel department began to recruit a large number of people in various positions at Chen Mo's request, but because of Jarvis' screening and checks, a large number of unqualified personnel were eliminated, and the recruitment speed of personnel was slow. It's not too fast, but after more than a month, many people still joined in through the review, and it was with the addition of these people.

With their assistance, the automated production line for cars could be built in such a short period of time.

Now that the construction of the production line is completed, although the orders for "Knight" have increased a lot, there is still some surplus of personnel.

This time, the establishment of a separate machinery manufacturing company was formed by mobilizing some of the old employees of Aegis Motor Company as the backbone and mobilizing these new employees.

Since the equipment of the machinery company is purchased separately, and there are not many old employees transferred from the company, the production capacity of Aegis Motor Company itself has not been greatly affected, while the machinery company has all the plants, equipment and personnel. After it was in place, it was quickly put into production, but this time, it was not the equipment of the manipulator related to the automated production line, but the basic industrial equipment such as machine tools and forging presses.

Just like the manipulator, Chen Mo has a full set of technical materials and drawings, equipment, professional workers, engineers and technicians. Although it will be a little troublesome at the beginning, it is not a problem to manufacture it.

Chen Mo copied the technical drawings of various advanced industrial equipment from Hydra. With this machinery company, these equipment can be gradually transformed into finished products and applied to Chen Mo's business empire.

After all, it is too troublesome for him to use the space to bring equipment from the movie world. Not only is the number that can be brought back each time limited, but it may not always be available every time.

Moreover, the sudden appearance of a batch of too advanced equipment out of thin air is easy to cause suspicion, so Chen Mo brought all the equipment from Hydra and put it in the basement of the castle and kept it for himself.

However, buying all of them from outside is too expensive and the delivery time is too long, so it must be purchased in advance. In addition, at this stage, it is good to say that the technological level of the products is not too high, and the purchased equipment is sufficient to meet the production needs, but with the company's development With development, there will definitely be more advanced cutting-edge products in the future, and the equipment of the current world technical level cannot meet the needs.

And since Chen Mo has a complete set of complete technical data, he can produce it himself.

On the one hand, in order to train and train the company's employees, on the other hand, it is inevitable to suddenly create too advanced equipment and cause suspicion. Chen Mo first came up with some basic industrial equipment that is equivalent to the current world advanced level. Technical data and drawings.

These devices can already meet the needs of the current stage. In the future, with the development of the company and the improvement of personnel skills and experience, we can gradually come up with equipment materials of higher technical level according to the needs, so that the gradual progress will not be too suspicious. .

Although the first phase of the Aegis Industrial Park has been completed, Su Wan has not been idle. On the one hand, she has to take care of Chen Mo's life, and on the other hand, she is also busy with the Aegis Motor Company, and she has to prepare The upcoming second phase of the industrial park.

Although the area of ​​the first phase of the industrial park is already very large, in addition to those already occupied by Aegis Automobile Company and the newly established Aegis Machinery Company, as well as the workshops reserved for later expansion, there are still many vacancies left.

However, with the development of the company, the further the company will expand, the faster it will be. If you wait until you need it before starting construction, it will be too late. Therefore, some projects that have already been planned must be constructed in advance.

Su Wan's daily busyness is not much different from before. Chen Mo simply handed over the work of the Aegis Machinery Company to Anna.

It was less than a month after she came to the company that she was so highly regarded by the boss. While Anna was overjoyed, she also worked very hard and worked hard. The construction of Aegis Machinery went faster and smoothly than Chen Mo expected.

On this day, Chen Mo came to the company once again. After inspecting various departments and factories, he listened to the reports from the leaders of various departments of Aegis Motor Company, as well as Su Wan and Anna on recent work in the conference room.

The sales of "Cavaliers" are still high, although not as crazy as some time ago, and there are nearly 100 new orders every day.

( = )