Chapter 1291: Too Many Elements (4K)
Chapter 1291 Too Many Elements—Excessive (4K)
Among the students who heard this conversation on the sidelines, some had extremely violent inner fluctuations.
The manufacturers that the Special Equipment R&D Center cooperates with are all Blue Star's top factories. For example, if a high-temperature alloy manufacturer wants to be a high-temperature alloy supplier for its own project, it must go through an extremely demanding and complex verification process.
First, the trial sample needs to be delivered to the forging factory established by Titanstar and accepted for inspection. After passing the inspection, the forging must be inspected by Titanstar's parts factory and then processed into parts.
This inspection process requires at least nine rounds, that is, the metallurgical plant needs to provide nine batches or more of alloy ingots to the forging plant to make forgings, pass each layer of inspection, and finally make qualified parts.
Only the finished products in each batch of the above links that fully meet the process requirements can be included in the procurement system of the special equipment R&D center.
Moreover, due to the high barriers to industry entry, Daxia currently implements licensing management for weapons and equipment scientific research and production activities, and no corresponding production activities are allowed without obtaining a license. Those engaged in fungi-related production activities must pass strict examination and obtain bacteriological qualifications.
The special equipment R&D center uses Jiuzhou Technology’s secret qualification channel for bacteria engineering. The communication and cooperation are with bacteria engineering companies. These companies have strong R&D, management and quality control capabilities, and they are not short of such a small amount of money.
The reason why we accept the cooperation of Jiuzhou Technology Special Equipment R&D Center is entirely because the cooperation between Jiuzhou Technology Titan Star Community and them over the years has been very successful. Everyone has obtained advanced technology and equipment, so they are willing to go to the Special Equipment R&D Center again. Boat.
After rejecting this batch of materials, Li Zhaotang, the head of the laboratory, said with emotion: "The core barrier to deformed high-temperature alloys lies in the smelting of raw materials.
The triple smelting process of vacuum induction smelting, electroslag remelting, and vacuum arc remelting is used to prepare large-size ingots and master alloys. The forming is completed through a specific forming process and the microstructure is specifically controlled. Finally, the alloy ingots are prepared into various specifications. Standard parts materials.
The preparation of various high-temperature alloys we need has different process barriers from raw material smelting to different forming processes. The process progress of these factories depends to a large extent on the stringent requirements for materials in our laboratories.
After all, these reworks will require the factory's technical department to conduct repeated trials to optimize marginal parameters, and the construction of heavy-duty processing equipment and the accumulation of manual experience can only grow through repeated trials and tribulations.
To protect these factories, we should be stricter with them.
If we care about our projects, we should also care about every gram of materials used in the projects.
I heard that the factory is already carrying out research work on triple pure smelting of high-temperature alloys. According to theory, compared with the current double vacuum smelting process, the stability of the triple smelting process will definitely be significantly improved, and the carbide will be further improved. Uniformity of distribution and thermoplasticity.
I asked the factory for more requirements. Not only did I need to pass two decimal places, I also needed a breakthrough to one decimal place.
The materials from our research project will be used in more than just nozzle components in the future? The components that can be seen everywhere in the vector engine all require materials with similar performance to a greater or lesser extent, so everyone should not ignore these things.
When I was working in the Titan Star Department, Mr. Gu once said something that is still fresh in my memory. He said, "Every small detail in scientific research is a boulder on our normal road. Every detail that is handled well is A smooth road was opened up. ’
At the beginning, the mecha R&D department hastily ended the research and development of the mecha's mechanical structure and materials. Although the final product satisfied both Junfang and ordinary people, the final 'Wukong' mecha, which was personally designed and supervised by Mr. Gu, was Being able to use the same craftsmanship to show a force value that ordinary mechas cannot compete with relies on careful consideration of every link.
So after that, the mecha research and development department seemed to have disappeared. They did not stand up to speak at many meetings. Every time they spoke, they only asked for people and equipment.
I think that if they work so hard, the next version of the mecha may actually be allowed to enter the regular use.
More than half of this year has passed. When our company begins to summarize this year's major R&D projects, if we are embarrassed on the vector engine project, I am afraid that there will be many fewer engineers willing to come to our laboratory next year. "
Li Zhaotang's tone was filled with emotion, but his hand movements did not stop.
After taking out the tablet and taking a picture of the material in front of me, I clicked the unqualified button and gave it a score of 4.5, um, ten points.
The materials have not been sealed and returned, but the order score has been presented to the internal management system of a certain bacterial manufacturing company.
A staff member with a calm breath became confused after seeing this score and the three characters "unqualified".
"What he brewed is unqualified. He is really a troublemaker! If there had been such a troublemaker in my camp back then, I would have made him run dozens of kilometers with heavy loads for additional training!"
After scolding several times, the staff member with a somewhat angry face picked up the keyboard on the side and resumed very skillfully: "Our company has learned that, please return the material in accordance with the agreement. After the inspection is completed, , our company will restart the process for your company..."
Witnessing the "scientific research work" of Li Zhaotang, the head of the Vector Nozzle Material and Cooling R&D Laboratory, Gu Qing nodded with satisfaction, and then quietly left the laboratory.
He was not afraid of being criticized by this senior engineer who liked to hold his hand and discuss technology, industry, and international environment all the time. He just felt that this person's work performance was already very good, and he didn't need people outside the industry like him to point fingers.
After all, it was Gu who made those fungus enterprises and factories headache, so Gu Qing's steps when he left were a little light.
After leaving the laboratory in two steps, Gu Qing went straight to the [Special Flight Equipment Pilot Function Research Laboratory].
The office area of this laboratory is not on the upper floor of this building, but on the third to sixth floors underground, with a total experimental area of more than 10,000 square meters.
On the way, Xuanwu also sensibly collected some information for Gu Qing to see.
Although Xuanwu sorts out several documents related to major laboratories every day, these documents are all general and vague descriptions. Some details and "unimportant" projects have been deleted to ensure the density of information.
In the information collected this time, Gu Qing saw the real gap and historical problems.
At present, there is a gap between the number of Daxia's fungus machines and Uncle Sam's, but the total gap is the total gap, and the technical gap is extremely vague. Even many models have surpassed the US aircraft.
According to Xuanwu statistics, the total number of Uncle Sam's active fungus machines is 16,236, accounting for 27% of the world's active fungus machines, while the total number of Daxia's active fungus machines is 5,254, accounting for only 7% of the world's active fungus machines.
According to the various sub-models, fighter jets are the main fungus in Daxia's fungus machines, with a total of 1,781, but the number is less than 60% of Uncle Sam's during the same period, and the number of other models is far behind.
In addition to the quantity, the advancement of Daxia's fungus machines has already made a brilliant performance. Although it is currently in a critical period of renewal, new fighters are being accelerated, and the number of special aircraft, transport aircraft, bombers and other fungus machines is also increasing.
The second-generation aircraft has just been replaced by the third-generation aircraft, and many third-generation aircraft have begun to be replaced by the fourth-generation aircraft. While the fourth-generation aircraft is still a precious treasure, the fifth-generation aircraft J-20 is also being openly installed.
Because Daxia's fungus party has a small stock of fungus machines, it can be replaced and upgraded more quickly.
In recent years, the cooperation relationship with Daxia has deepened, and Gu Qing has also learned one thing: the ratio of the purchase cost of fungus aircraft to the maintenance cost during the life cycle is close to 1:1.
In other words, if Jiuzhou Technology can guide Daxia's fungus factories and material factories to upgrade their technology, and if it has some sufficiently excellent metal patents, in the future, the trillion-dollar maintenance market for Daxia's fungus aircraft engines will have a lot of small money in Jiuzhou Technology's pocket.
No, but on this road, Jiuzhou Technology still has many competitors.
For example, Western Superconducting, which was established 21 years ago, is the only company in Daxia that has achieved commercial production of low-temperature superconducting wires. It is also the only full-process manufacturer of niobium-titanium ingots and wires in the world.
Jiuzhou Technology has many projects with this competitor, such as the research and development of high-end titanium alloy materials and low-temperature superconducting materials. It is also one of the main suppliers of Jiuzhou Technology's drone aircraft, aerospace products, and mecha research and development departments.
It is both a profitable competitor and a cooperative friend in the research field.
This complicated relationship did not make Gu Qing feel troubled, but made him feel much more relaxed.
After all, he has now focused on the big project of developing the moon. It is a good thing to have stable teammates to provide high-quality materials in other resource fields.
The sound insulation effect of each room in the special flight equipment pilot function research laboratory is so good that when Gu Qing enters the observation area of a laboratory, he can't hear any sound from the experimenters inside.
It's just that the experiment participant on the inspection table, who was tied up like a zongzi, had lost control of his facial expression.
That distorted expression made Gu Qing feel a little scared.
This is the special feature of the Special Flight Equipment Pilot Function Research Laboratory. The Vector Nozzle Material and Cooling Research and Development Laboratory and the Vector Nozzle Direction Change Mechanism Design and Control System Research and Development Laboratory upstairs are all conducting research and development on physical materials.
However, this Special Flight Equipment Pilot Function Research Laboratory is inhumanely conducting various tests, cultivation, research and development and retesting on "biological materials".
The Future Warrior Project is a human enhancement project jointly developed by Gu Qing and Jun Fang. The confidentiality level is extremely high, but the experimental project is very humane to the experimenters. Every experiment will fully respect the personal dignity of the participants and do its best to ensure the physical and mental health of the experimenters.
Even every drug test will be conducted after the animal experiments such as mice, rabbits, and monkeys are completed, and then the benchmark test will be conducted according to the physical fitness of each person.
In this slow and scientific process, Gu Qing, as a project participant, has already possessed physical fitness far beyond that of ordinary people.
Compared with the Future Warrior Project, the experiments in the Special Flight Equipment Pilot Function Research Laboratory are very rough and cruel.
Although the laboratory's experiments are also conducted after the completion of animal experiments such as mice, rabbits, and monkeys, and then benchmark tests are conducted based on the physical fitness of each person, the success criteria of animal experiments are completely different from those of the Future Warrior Project Team.
In the Future Warrior Project Team, in the last stage, the monkey experiment, any problems with the monkey's intelligence, cognitive ability, and body will affect the hearts of countless scientists, biological experts, and doctors. Only after all these abnormalities are dealt with can they enter the next stage.
In the special flight equipment pilot function research project, scientists only need to record the special reactions of monkeys in the last stage - the monkey experiment. If it is determined that there is no threat to life and cognition, they can enter the next stage and start human testing.
Of course, the experimental material of this laboratory research project - the selection of humans is not as harsh as that of the Future Warrior Project. Basically, gorillas that are very close to humans are used.
Even on the sixth floor, Gu Qing saw several gorillas that look exactly the same being placed in life-support cradles.
"Your intuition is correct. The original radiation of the universe has no benefit to the orangutans. However, after several generations of reproduction, some of these gene mutations that are better for the current environment will be retained, and even become dominant genes.
Because of long-term immersion in the life cradle, the lungs of the 22nd generation of experimental specimens have larger bubbles, and the teeth have degenerated seriously, but the pineal gland has grown a little bigger.
Every time we wake up these orangutans, their eyes gradually become less confused, and some of them have even learned addition and subtraction within ten on their own.
Without any teaching from us, they have been observing us. Although they cannot walk under the restrictions of the life cradle, in our surveillance videos, there are already five orangutans who can practice walking on their hind legs and leaving the ground on their forelimbs in their sleep."
Listening to the person in charge of the special flight equipment pilot function research project excitedly giving various examples beside him, Gu Qing's expression has never been relaxed.
After the other party finished introducing the current situation, Gu Qing, the founder of Jiuzhou Technology, turned his head and stared at the person in charge of the experimental project, and said with a cold look: "So you haven't cultivated a cyborg that can conduct space experiments yet?"
The person in charge of the experimental project was immediately confused by this cold look.
"We can't understand the origin of the orangutan's intelligence for the time being, so we can't develop a technology that can erase the orangutan's intelligence and keep its limbs active for a long time."