Chapter 684 Unloading

Remember in a second [Wanben Station] Mobile phone users enter the address: m.xinwanben.com

"Well, you can go back. First, you can check if there is enough space in the workshop. If not, then clean up some places. There must be enough space for these steel materials!" Qin Dachuan said again.

"Okay, I understand." Zheng Fang agreed, and then hurried out of Qin Dachuan's office again.

This night, Qin Dachuan was really excited! After waiting for such a long time, the 'fat meat' was finally delivered, why didn't Qin Dachuan get excited!

The next day, Qin Dachuan called Zhao Gang and Li Nansong into his office early in the morning.

"Director Qin, what's the matter?" Zhao Gang pretended not to know what it was, so he asked first.

"Zhao Gang, you and Li Nansong will be in charge of putting the new steel from the General Armament Department into your workshop. At that time, your workshop director, Zheng Fang, will also send some workers over. Together, those workers put these new types of steel into the workshop." Qin Dachuan looked at Zhao Gang and said such a thing.

After Zhao Gang heard this, he said with a smile: "Hehe! Well, once these steel materials are shipped, will our base produce a new type of sniper rifle?" Qin Dachuan also smiled and said after hearing Zhao Gang's words: "Of course , we are about to develop a new type of sniper rifle, and these steel materials are used to develop these new type of sniper rifle." Qin Dachuan looked at Zhao Gang again and said.

"Well, Li Nansong and I will work with some other workers to unload the steel and put it in the workshop." Zhao Gang said again.

"Okay, that's it, you two hurry over there! Maybe the steel truck will arrive soon." Qin Dachuan saw that it was already past nine o'clock in the morning, and he thought that the big steel truck might arrive soon. About to arrive.

"Okay, let's go." After Zhao Gang finished speaking, he walked out of Qin Dachuan's office with Li Nansong.

Just like that, after another half an hour, Qin Dachuan heard the roar of a large truck. He knew that the 'fat meat' he wanted had arrived. So, I hurried out of the office and stood in the corridor to take a look.

When he looked at it, he saw a heavy-duty truck driving in from the gate of the base. It was a large truck that could load dozens of tons of goods at a time.

"Haha, it's finally here, I want to go down and have a look." Qin Dachuan saw that the large truck full of new steel materials had finally arrived, so he hurried downstairs and stood at the door of the office building Watching this big truck drive past him in the open space.

The driver of this big truck also saw Qin Dachuan. It's just that he didn't know Qin Dachuan, so he didn't stop the car either. He just transported the so-called new type of steel to Base 308 according to Liu Tianming's instructions. And according to what Director Liu said, they drove directly to the door of workshop No. 1.

Qin Dachuan saw that the big truck didn't stop beside him, so he had no choice but to run along with the big truck. After all, the "fat meat" in this car has already made him "covet". Now that it was finally delivered, he certainly wanted to see it with his own eyes.

After the big truck drove to the door of the workshop, it stopped. Then, a person got out of the car. This person was probably in his thirties, and he was a tall, thin young man. He is the person in charge of delivering the goods this time, and he was also sent by Liu Tianming.

After this person got out of the car, he took a look at the surrounding environment first. After all, he had never been to the 308 military industrial base before, so this was his first visit, so it was naturally a bit new.

At this time, Qin Dachuan also ran to the side of the big truck.

Zheng Fang, Zhao Gang, and Li Nansong had already heard the sound of the big truck, and they had already come out of the workshop. Looking at it now, the person in charge of the big truck got out of the car, and everyone surrounded him.

"Which of you is the person in charge of this base!" The person in charge who got out of the car got out of the car and looked at everyone like this and asked.

Zheng Fanggang wanted to say that Qin Dachuan is the person in charge of this base. But Qin Dachuan had already walked up to the person in charge and said, "Hi, my name is Qin Dachuan, and I'm the factory director of this base."

The tall and thin person in charge took a look at Qin Dachuan, and reached out to shake his hand. Then he looked at him again and said, "Ah, you are the factory director of this base, that is to say, you are the factory director Qin."

"Ah! Yes! But I just took office. Before that, I was the deputy director of this base." Qin Dachuan looked at the young man with a smile on his face. Although, Qin Dachuan has always been defiant. But the people in the General Armament Department all have backgrounds. Although this young man may not be a high-ranking official. But Qin Dachuan didn't even dare to offend others.

"Master Qin, hello, this is a truckload of high-end imported alloy steel materials sent to your 308 base by the General Armament Department. It is used to develop new sniper rifles. Wait for a while, unload these steel materials and put them in the Go to the workshop!" The young man said this first.

"Okay, I have already discussed with Director Liu, and put these new steel materials in the No. 1 workshop. In this way, it will be convenient to use at that time. Originally, this new sniper rifle was to be developed in this No. 1 workshop. Yes." Qin Dachuan said with a smile again.

"Okay, then Director Qin, please sign the bill of goods! In this way, we have delivered the goods to you." The tall and thin young man, from a briefcase he carried with him, He took out an invoice filled with product information and handed it to Qin Dachuan, asking him to sign it!

Qin Dachuan

He happily took out a ballpoint pen that he carried with him, and signed his name on the manifest.

"Come on, I'll sign it, and you can keep it!" After Qin Dachuan signed it, he gave the manifest to the young man who got off the car.

"Well, you can unload the car." After the young man finished speaking, he didn't respond to Qin Dachuan. He just walked to the car door, opened the car door, and got into the cab again. After going up, he just closed the door again. The driver who was driving before just didn't get out of the car. The two chatted in the cab. They seemed to ignore Qin Dachuan at all.

Although, they didn't take Qin Dachuan seriously. But Qin Dachuan was not angry at all. After all, they came from the general equipment. Maybe his official position is not as high as his own, but he has nothing to do with you, Qin Dachuan. Of course they won't curry favor with you, Qin Dachuan. Even if you are a top leader, you can only be awesome in front of the employees in the 308 military base. But outside of this 308 military industrial base, no one takes you Qin Dachuan seriously.

Qin Dachuan saw that the person in charge was sitting in the car again, so he said to Zhao Gang and Li Nansong beside him, "Come on, you two can get on, first take off the canvas cover on the truck." Zhao Gang listened to Qin Dachuan. When Da Chuan said, he readily agreed, "Okay, we will get in the car right away." After speaking, Zhao Gang and Li Nansong winked, and they just pulled the rope next to the truck compartment and got into the car.

At this time, Qin Dachuan said to Zheng Fang beside him: "You ask the workers in your workshop to untie the ropes on both sides of the truck first. In this way, Zhao Gang and Li Nansong can remove the roof of the truck. The cloth was uncovered and taken off."

"Okay, I'll call some people over right away." Hearing Qin Dachuan's words, Zheng Fang immediately called some workers and explained a few words to them. These workers quickly ran to the front of the truck and quickly untied the ropes tied on both sides of the carriage.

After the rope was untied, Zhao Gang and Li Nansong first coiled the rope and got off the car. After that, the tarpaulin was uncovered again, and the workers below were asked to work together with the two of them to remove the thick and heavy canvas tarpaulin from the roof.

After the canvas canopy was removed, the steel inside the carriage was exposed. Li Nansong looked at the steel under his feet, and he was a little puzzled. Because these steel products do not look like new imported steel products at all, because these steel products are the same as ordinary steel products from the outside.

Both Zhao Gang and Li Nansong have worked in the workshop for many years, and they have seen a lot of steel. The steel in front of them, no matter how you look at it, is ordinary steel. How can it be a new type of imported steel?

Therefore, Li Nansong wanted to ask Zhao Gang beside him. He looked at Zhao Gang and said, "Brother Zhao, this is a new type of imported steel. What do I think, is it the same as the steel we used to make AK-47 assault rifles before?"

After hearing what Li Nansong said, Zhao Gang glared at him and said, "What do you know? This is a new type of steel. Don't look at it as ordinary, but the texture is different." Hearing what Zhao Gang said, Li Nansong had no choice but to tap Head, no more questions.

Besides, when Qin Dachuan saw that Zhao Gang and Li Nansong had taken off the tarpaulin on the truck, he immediately asked Zheng Fang to lead the workers in the workshop to move the steel.

These steel materials are steel plates with a diameter of about thirty centimeters, a thickness of five millimeters, and a length of about two meters. These steels are the raw materials for making guns. At that time, when making guns, just put these steel materials on the stamping machine according to a certain mold, and stamp the shells of various parts on the gun body.

Of course, these steels are also used to produce the shells of guns. The most important parts of guns such as the barrel cannot be pressed with these steel plates. It is necessary to use some rectangular steel ingots, which are first cut and polished into a cylindrical shape, and then a special machine tool is used to turn this cylindrical steel rod into a cylindrical shape. Hollowed out into a copper tube, in this way, the prototype of a gun barrel can be made.

But even so, it is still far from finishing a barrel. Next, this copper tube needs to be processed with multiple processes to make a gun barrel! Among them, the most important step is to process the rifling inside the barrel. This is an extremely fine and highly technical process.

As for the production of barrels for sniper rifles, the requirements are of course even higher. This has higher requirements for precision than the production of ordinary guns. Now on this truck, there are some raw materials for making sniper rifle barrels. They are round steel rods more than one meter long. At that time, these steel rods will be processed into barrels for sniper rifles in the workshop of the 308 base.

These steel plates for making gun bodies are placed on this truck. And under these steel plates, some steel rods are pressed. Now Zhao Gang and Li Nansong are on the car, first helping the workers to lift all the steel down. After that, these workers just carried the steel plates into the workshop.

When there are some steel rods left, there is no need for someone to go on them. Zhao Gang and Li Nansong also got out of the car. Because at this time, standing on the ground, you can directly pull these steel rods from the top of the carriage. There is no need for someone to help above. One person is able to work below.

Now, Zhao Gang and Li Nansong are working with the workers to move all these so-called new steel products into the workshop. According to the position cleared out before, these steel materials were piled up on an open space. Placed below are those steel plates used to make the body of the gun. Those steel rods are placed on it. These tens of tons of goods, put there, are piled up as high as a person!

When all these steels are moved to

After leaving the workshop, the person in charge of the General Armament Department who came to deliver the goods got out of the car again, talked to Qin Dachuan, and then drove away from the 308 military base with the driver.

After watching the truck leave, Qin Dachuan walked into the workshop again. These steels may not mean much to others, that is, some so-called new steels are used to develop new sniper rifles.

But to Qin Dachuan, that was of great significance. To others, these stacked steel products were just some steel products. But from Qin Dachuan's point of view, it felt like bundles of banknotes were piled up.

Look at the stacked rows of steel and steel rods. Qin Dachuan was extremely excited in his heart, he felt that he was getting closer and closer to the day when he would make a fortune. It can be said that Qin Dachuan knows nothing about military technology.

Even if he saw the steel, he couldn't tell whether the steel was good or bad. I don't know the difference between these steels and ordinary steels. He just knows that these steels are imported high-quality steels, which are many times more expensive than the ordinary steels they used before.

Now these workers have left the workshop after stacking the steel. And Zhao Gang, Li Nansong and Zheng Fang just didn't leave here. After all, Qin Dachuan is still here, they just can't leave here. After all, they are all Qin Dachuan's friends. Since Qin Dachuan is still in this workshop, they naturally have to accompany him.

Support (end this god station) to share this station with those friends who need it! If you can't find the book, please leave a message!