Chapter 672: Breaking News (Part 1)

No matter what type of domestic sniper rifle, as long as the distance exceeds 300 meters, the ballistic spread will suddenly increase. Heavy barrel, but also have to use special bullets.

Now, at 800 meters, the deviation of domestically produced NATO bullets does not exceed 30 centimeters. This is already an extremely good gun. The high-precision bullets made by Guo Tailai can be used, and ten bullets can hit a circle with a radius of 14 cm. It is conceivable how excellent the accuracy of this gun is.

This is the first time to use it, and everyone is still using it with the experience of using the L115A1. If you wait until you have fired thousands of rounds of bullets and mastered the characteristics of the gun, then at this distance, you can’t point to where to shoot?

Eight hundred meters! How many domestic snipers can deviate by 14 centimeters from 800 meters? This deviation is enough to hit the target with a gun.

When the target is stretched to one thousand meters again, the deviation of domestic bullets has exceeded 2moa, and the deviation radius has exceeded 60 cm. However, imported bullets can still shoot with an accuracy of 1.2moa. As for the bullets made by Guo Tailai, they still maintain an accuracy of 0.75moa, and the deviation radius is still 22cm.

The people present are all professionals, and the kind of shooting how one wants to shoot at one thousand meters can only exist in movies. It can be said that within one thousand meters, this gun is the best sniper rifle. What's more, the effective range is still 1,600 meters?

He didn't continue to shoot at a target at a longer distance. In the past, being able to hit a target at a distance of 1,000 meters was already a good result that only the best shooters could hit by chance. Three or four shots on the target have fully demonstrated the excellence of this sniper rifle.

What is even more surprising is that this gun has such high accuracy, but it weighs only 6.5 kilograms, which is slightly heavier than an assault rifle loaded with bullets, but lighter than a large-caliber sniper rifle like Barrett. too much. It is easy to carry, but the range is so high, enough to change the situation on the battlefield at some point.

Today is only the first test. In fact, the accuracy of this test is not standard. The real test should be to measure the spread of 30 rounds of bullets with each gun in a cold state. This is the standard. In addition, the use in various environments, as well as the life of guns, especially barrels, are also very important indicators. These detailed tests cannot be completed in a day or two.

But even today's non-standard test has surprised everyone who saw it.

However, today's test still exposed some problems and gaps in our country's military system.

Due to the lack of awareness of precise shooting and the limitations of economy, resources, and industrial capabilities, my country's firearms and ammunition have long been more concerned with saving materials and process costs and improving power. The finished product only needs to be able to fire reliably to meet the requirements. From the 79-type sniper rifle imitating the Soviet SVD rifle to the later 88-type sniper rifle, there are no supporting high-precision bullets, which are very typical examples.

The gap in craftsmanship has caused the domestic bullets to perform the worst among the three types of bullets. In the post-loading process of the traditional bullet production line, the steel core and lead pad are loaded forward from the tail of the bullet shell, punched in place with punches and other tools, and the tail is closed. This process will damage the consistency of the bullet to a certain extent, and then affect the positioning accuracy and bullet pointing in the early chamber of the shell case. Insufficient positioning accuracy will make the fit between the bullet and the barrel unable to be tight, firm, and consistent; it will cause a large difference in the initial pointing of each bullet, and destroy the consistency of the trajectory.

The production of bullet casings in our country only looks at the external dimensions, and does not look at the acceptance criteria for mass distribution (thickness and thickness), which is also a huge gap. Facing the accuracy of ammunition molds in the West, which is equivalent to the accuracy of my country's measuring tools, and the far more cumbersome and strict acceptance standards, there are still many years of debts in process and quality control, not to mention making up for the huge defects in caliber design and materials.

It is also domestically produced, and Guo Tailai's handcrafted bullet casings and warheads are not inferior to imported ammunition, but perform better, which is already very telling.

In the past, there were no good ones, so they had to use existing things to support themselves. Now that they saw the design samples Guo Tailai took out and the bullets Guo Tailai produced, the leaders of the military region couldn't sit still. It happened that Zhao Xiangbei from the Dongfang Group was at the scene, so without further ado, he immediately dragged Zhao Xiangbei to talk.

The central idea is very clear, no matter what other military regions think, the capital military region must be the best. There was no way to do it before, but now that we have it, it goes without saying that we must have the best. Zhao Xiangbei decides how to produce it himself, even if the cost will increase a lot, the military will accept it. This is a high-precision sniper rifle, and it is not an assault rifle for everyone. It is only equipped with a small number of troops. If the cost is high, the cost will be high! Is it more acceptable than letting the special fighters out of the mission hold foreign sniper rifles?

In fact, Zhao Xiangbei wanted to change some ideas a long time ago. As early as when he was in charge of the Southern Group, he was constantly trying to improve the quality and craftsmanship. How can there be any disagreement about this? He would agree to it just to support Guo Tailai, not to mention that he also wanted to improve the craftsmanship and quality of the military industry system, and the two hit it off.

Guo Tailai's sniper rifle is actually a good opportunity. It is normal for high-precision sniper rifles to be expensive. Who doesn’t know that you get what you pay for? Didn't the problem have such a good product before, isn't the military reluctant to spend that money? Now that there is one, and the military can accept the high cost, why is Zhao Xiangbei hesitating?

Guo Tailai handed over the sample gun and design drawings, and took his senior sister back to rest. There are at most two or three days to be together, Guo Tailai doesn't want to waste any more time with the military or Zhao Xiangbei, there are big things to talk about after the New Year's Day holiday, Guo Tailai doesn't plan to let the senior sister leave these days .

Of course, Zhao Xiangbei is fine, and the Beijing military region will also conduct more tests on sniper rifles with Zhao Xiangbei, so it is absolutely fine to give Guo Tailai a few days. In addition, most of their energy and time now have to deal with people from several other military regions, and they don't care about Guo Tailai's side at all.

There are no vegetarians in the major military regions. Guo Tailai has another good thing here, and it is a high-precision sniper rifle. Can this news be sealed at the level of the head of the military region? The phone calls from the assembly side have never stopped, and all the leaders of the major military regions have personally intervened in this matter.

The head of the final assembly also has a headache. Anyway, he is the leader of the military region. Well, anyway, there are only so many sample guns. Except for the two all-titanium alloy versions, you can fight for the others yourself!