Chapter 79 On 3D Printer Printing Otaku Goddess

In the background of Bilibili, there are constant private messages.

Most of them were urged by fans, and some technical parties asked about the technical process.

Others are invitations from various platforms, hoping to cooperate.

There are even several well-known brands.

Because Lu Cheng did not publish his contact information on the platform, they could only contact them through private messages.

"It seems that a popular video has more influence than I thought." Lu Cheng couldn't help but sigh.

He looked at the number of fans again.

In just half a day, the number of fans has increased by another 100,000 to 300,000!

The number of plays has also reached 1.5 million.

As for the technology points, it has been increased by 1000 again, reaching 7000 points.

but.

Lu Cheng knew that the video was recommended and exposed a few days ago, so there was a short-term explosive growth.

After a few days, the popularity will decrease, and the number of broadcasts and fan growth will gradually stabilize.

Lu Cheng replied to some private messages a little, and then devoted himself to the production of exoskeleton armor again.

Before, he only made mechanical limbs, and the helmet, breastplate and the driving device behind it were not made.

With the robotics knowledge learned from "Super Marines", this unfinished part can be enriched.

at the same time.

Lu Cheng also bought some materials needed to make a 3D printer online.

Except for the special ink benzene tin that needs to be upgraded with technology points, the rest of the materials can be found in this world with the same style or substitutes.

After two days of work, Lu Cheng finally made the breastplate of the mechanical exoskeleton.

After wearing it with the mechanical limbs, it looks even more handsome.

It feels like a futuristic warrior!

However, Lu Cheng did not publish the video immediately.

He is going to release all the equipment together after finishing all the equipment.

In this way, the effect can be more shocking.

And just like that, ten days passed in a row.

Lu Cheng finally made a full set of exoskeleton armor.

At the same time, the relevant materials for making 3D printers are also purchased one after another.

According to the relevant drawings in his mind, Lu Cheng began to assemble the 3D printer.

Build the frame, set the program, grind the material.

It took a full day to finally make the finished product!

This is a device that is three meters wide and five meters high.

The shape is a bit similar to an ordinary printer, but it is much more complicated than an ordinary printer.

The top is the material input port. After the material is put in, the system will go through an internal inspection to classify these materials and divide them into various areas!

Then, import the modeled 3D image, set the relevant scale, and start printing.

The printed product will be slowly generated from the outlet made of special nanomaterials below!

If the height or width of the model exceeds the capacity of the 3D printer.

The 3D printer will print layer by layer according to the modeling, and the rest will need to be assembled by yourself.

certainly.

The width and height of the 3D printer can also be adjusted by yourself.

Because Lu Cheng only needs to print only prosthetic limbs, there is no need to make the 3D printer too large.

"Try the effect."

Lu Cheng imported the designed 3D model inflatable doll of Teacher Tianhaiyi into the 3D printer.

Then, the related materials were also put into the material port, and the start button was pressed.

blah blah-

Soon, the 3D printer lit up and started printing.

five minutes later.

With the sound of 'ding', the inflatable doll was slowly produced from the outlet.

Lu Cheng opened the finished product warehouse, took out the inflatable doll, and began to look carefully!

"It's so perfect, it's exactly the same as a real person." Lu Cheng was amazed.

The effects of 3D printers are amazing.

It perfectly reproduces every detail of Teacher Tianhaiyi.

Each proportion is also very accurate, almost the same as the modeling graphics.

It's like a heifer basking in the sun - awesome!

Once this product is launched, it must be a gospel for otaku.

Those two-dimensional wives can almost perfectly appear in the real world through 3D printing!

No longer in fantasy.

"Cough, this thing still can't be seen by Xi'er." Lu Cheng coughed dryly.

He quickly placed the inflatable doll in the material port and pressed the factory reset button.

Soon, the inflatable doll was fed into the 3D printer.

After a while, it became raw material again.

Of course, the amount of material is reduced.

When making the inflatable doll just now, it was impossible to use all the materials.

Some excess materials will be sent to the waste bin of the 3D printer.

"Compared with exoskeleton armor, this is black technology!" Lu Cheng sighed secretly.

If this 3D printer technology is made public, it will definitely bring about earth-shaking changes to the production and processing industry!

Not only can the modeling drawings be perfectly reproduced, but the production time is also very short.

"Ten days have passed, and it's time to publish the second video of the series from scratch."

Lu Cheng put the 3D printer in the garage, and then began to make and edit the exoskeleton armor.

After ten days of fermentation.

The popularity of the video also gradually decreased, and the final playback volume was also fixed at more than 3 million.

Fans have grown to 500,000.

A video, attracting 500,000 fans, can already be called phenomenal!

After all, some up masters may not be able to have this number of fans even if they work hard to update them for a year or two.

Lu Cheng also looked at the playback volume of other platforms. Although it is not as high as Bilibili, it still has a considerable playback volume.

The whole network adds up, and the playback volume has almost exceeded 10 million!

The technology points have also increased by 3000 points accordingly.

However, because Lu Cheng used 2,000 technology points to make a 3D printer, his current technology points are still only 7,000.

"It's really useless. You must earn some technology points as soon as possible. When the company is officially established, a 3D printer will definitely not be enough."

Lu Cheng did not delay any longer, and began to devote himself to the production and editing of exoskeleton armor videos.

after one day.

The second video of the series from scratch has officially been released.

The title is: Exoskeleton Armor Complete Edition from Zero.

Just sent out less than ten minutes ago.

The number of playbacks quickly exceeded 10,000.

A barrage was also brushed up.

"He's here, he's finally here with black technology!"

"Ah, this time it turned out to be the full version, as expected of a conscience up master."

"It's coming, what are you going to do this time?!"

"I don't need any skills to do black technology, just hang up!"

Lu Cheng was a little confused when he looked at the subtitles on the screen full of 'hanging ratio', and immediately reacted.

A comment asked before, what skills are needed to make exoskeleton armor, and he replied: No skills are needed, just hang up.

Unexpectedly, it was directly played as a meme.

I have to say that the ability of sand sculpture netizens to see and insert needles is quite good.

However, after making trouble, many netizens turned their attention back to the video after joking.

When they saw the new features of this exoskeleton armor, they were shocked again!

ps: There are very few tickets, please ask for a recommendation ticket