HK1225 The Shock of One Percent Energy!

.

n235 metal, has a total of five stages of application programs. With the improvement of each application stage, the energy that n235 metal can release increases geometrically.

The data of the five-stage application plan are stored in the core source code of Yizuer, and even Shi Lei cannot directly view all the data.

The origins of the advanced pseudo-AI system Izual are very mysterious.

Although the core authority of the advanced pseudo artificial intelligence system Yizuer is controlled by Shi Lei, the core source code of Yizuer is not completely written by Shi Lei.

Shi Lei has repeatedly investigated the origin of Yizuer, but he has repeatedly failed to get an answer, so Shi Lei no longer investigates further. Anyway, Yizuer's core control authority is in his own hands, and Shi Lei is not worried about accidents.

Besides, no matter how weird Yizu'er is, can he be more weird than Shi Lei's own rebirth six years ago?

Because of the discovery of new n235 metal veins in the Bermuda Triangle, Shi Lei suddenly wanted to know the second-stage application plan of n235 metal.

The first-stage application scheme of n235 metal, the energy released by the same mass is about 40 times that of hydrogen and 120 times that of gasoline. Moreover, since n235 metal directly releases electrical energy and reduces the loss of energy conversion, its application value is even higher in the electrification era!

"The permission is being reviewed, please wait!" Izuer's icy voice reminded Shi Lei.

Shi Lei waited calmly and patiently on the surface, but he was a little uneasy in his heart. Fortunately, after about thirty seconds of waiting. Izuel gave a reminder again.

"Sir, do you want to check the second-stage application plan of n235 metal? Warning. This information belongs to the highest authority secret, and the system adopts the highest authority confidentiality measures by default." Izuer reminded Shi Lei.

The highest authority confidentiality measure means that the second-stage application scheme of n235 metal cannot be copied and saved by default, cannot be printed as paper data, and must be read in an environment with a camera and a behavior dynamic recognition engine.

in the context of the camera. Combined with a behavioral dynamic recognition engine, the system can determine the presence of video and camera equipment. If camera and photographic equipment is present, the system will not open the n235 metal's Phase 2 application profile.

"Check!" Shi Lei answered affirmatively.

"Yes, sir!" Izull showed all the second-stage application plans of n235 metal. The first difference between the second stage and the first stage of the application scheme is the material used for making the ultra-high-speed multi-frequency current exciter.

Materials for the core of an ultra-high-speed multi-frequency current exciter for first-stage applications. It is made of high-purity copper. Although the exterior is attached with steel material, it is used for protection. But the steel material is only a protective material, just like the protective cover of a mobile phone, it is only a protective effect, not a part of the ultra-high-speed multi-frequency current exciter.

Ultra-high-speed multi-frequency current stimulators for second-stage applications require high-purity silver fabrication cores. According to the information given by Izull. The core material of the ultra-high-speed multi-frequency current exciter for the second-stage application scheme requires at least 99.99 percent silver metal.

Silver metal with a purity of 99.99% is called Wanzu Silver. Wanzuyin is soft in texture, and it is not an easy task to manufacture the core of ultra-high-speed multi-frequency current exciters. after all. The core of the ultra-high-speed multi-frequency current exciter requires very precise dimensional parameters. The error must be controlled within the range of no more than 100um, which is very difficult to achieve.

At least with ordinary CNC machining centers, it is absolutely impossible to achieve micron-level ultra-precision machining solutions.

In life, the common silver metal processing scheme has only two purities of 92.5% and 99.9%. In the field of silver metal jewelry and crafts, s925 is the standard material. 99.9% pure silver metal, usually only used to make silver bracelets and simple-shaped rings.

Because the higher the purity of silver metal, the softer the texture. If the silver metal of s999 is manufactured with complicated products, it will definitely undergo various deformations.

As for Wanzu Silver?

This is not a national standard. Ordinary institutions cannot detect and judge whether Wanzu silver meets the standard, let alone the processing technology of Wanzu silver.

What seems to be a simple requirement is actually not simple at all!

However, the super-complex craftsmanship is worth the return in the end. Because the energy generated by n235 metal under the second-stage application scheme is definitely not comparable to the first-stage application scheme!

The n235 metal of the second-stage application scheme releases about one percent of the energy produced by the nuclear fission of uranium 238 of the same mass.

According to the energy generated by the nuclear fission of uranium 238, the energy released by 1 kilogram of uranium 238 is approximately equivalent to the energy released by the complete combustion of 2500 tons of standard coal. Then, the energy released by 1 kg of n235 metal is approximately equivalent to the energy released by the complete combustion of 25 tons of standard coal.

According to the conversion of the calorific value of standard coal, gasoline and hydrogen, the energy released per kilogram of n235 metal under the second-stage application scheme is approximately equivalent to the energy of complete combustion of 17,000 kilograms of standard gasoline, or approximately 5,645 kilograms of hydrogen released from complete combustion energy of.

Under the first-stage application plan of n235 metal, 1 kilogram of n235 metal is equivalent to 40 kilograms of hydrogen, or the energy after complete combustion of 120 kilograms of gasoline.

From the first-stage application scheme to the second-stage application scheme, the energy release rate of n235 metal has increased by 141 times!

A full 141 times!

If the second-generation Dawner is equipped with the ultra-high-speed multi-frequency current exciter of the second-stage application scheme, it can be said that there is almost no energy limit, and you can waste energy as much as you want!

Shi Lei was completely shocked when he saw that the n235 metal under the second-stage application plan had such a powerful energy release rate.

"This is only the second-stage application plan! What if it is the final fifth stage?" Shi Lei said to himself.

"Sir, I can't give an answer. The system didn't find any relevant content." Izuer gave a disappointing answer. Shi Lei was not surprised by this answer.

Application plan information of each stage of n235 metal. Shi Lei had already guessed that after a certain condition was reached, the core source code of Izuer would be able to unlock the data for the next stage.

As for what a certain condition is, Shi Lei doesn't know! Shi Lei now just wants to get the ultra-high-speed multi-frequency current exciter of the n235 metal second-stage application scheme!

After reading the information on the second-stage application plan of n235 metal, Shi Lei quickly called Li Guai. After Li Guai answered the phone, Shi Lei immediately informed the relevant situation. He told Li Gu, and finally asked: "Little plum, is there any way we can process Wanzu silver with micron-level ultra-precision?"

After Li Guai heard Shi Lei's introduction, he immediately smiled bitterly, "Brother Stone, I'm afraid not!"

"Why?" Shi Lei asked strangely. "It's not difficult to process silver metal, right?"

"Brother Shito, ordinary silver metal processing is really not difficult!" Li Cai explained helplessly, trying to explain to a mechanic like Shi Lei, it was a little difficult. "Do you know the properties of silver metal? The higher the purity of silver metal, the softer the texture. Let's not talk about the difficulty of processing soft metal for the time being, let's talk about silver metal with 99.99% purity. Where should we start from? Incoming?"

"Uh? Can't you buy Wanzu Silver in a jewelry store?" Shi Lei asked in a cute way. In Shi Lei's opinion, whether it's Wanzu Gold or Wanzu Silver. All can be bought in jewelry stores.

Listening to Shi Lei's words, Li Guai felt a little pained. "Brother Shito, can you have some common sense, how can a jewelry store sell Wanzu silver?" Li Gu explained in detail, making Shi Lei understand that Wanzu silver is not so easy to purify, and he continued. "Wanzuyin's problem, I can find a solution to my father."

Li Chai's father is in charge of the First Research Institute of Chang'an Aircraft Industry. In the environment of the aerospace laboratory, it is not difficult to purify the silver.

Li guess this is a proper rhythm!

"Very good! With Wanzuyin, there are no other problems, right?" Shi Lei said with a little expectation.

Li Guai still smiled bitterly, "Of course there is a problem, but it's still a big problem! I just said that Wanzuyin is very soft and cannot be processed by a CNC machining center."

"Then what to do? Xiao Lizi, let me tell you, no matter what method you use, you must make a super-high-speed multi-frequency current exciter with Wanzu Silver craftsmanship!" Shi Lei gave the necessary order.

Li Guai thought for a while and said, "Brother Shitou, it's not impossible to process Wanzu Silver!"

"Oh? What can I do?" Shi Lei's eyes lit up, "As long as the ultra-high-speed multi-frequency current exciter can complete the Wanzu Silver process, you don't need to care about the cost!" Shi Lei expressed his wealth.

"Brother Shitou, do you know laser processing technology?" After Li Guai asked, he wanted to slap himself. How could Shi Lei know about this high-end processing technology?

Sure enough, Shi Lei gave a negative answer.

"Brother Shitou, you just said that the process error of the ultra-high-speed multi-frequency current exciter in the second-stage application scheme needs to be controlled within 100 microns, right? Ordinary CNC machining centers cannot be completed at all. Only laser processing technology , it is possible to meet this requirement. However, our country's laser processing technology is relatively backward." Li Gu said a regrettable fact.

Xia Guo's laser processing technology is indeed relatively backward. This is because there are few finishing enterprises in the manufacturing and processing enterprises in Xiaguo. On the other hand, most of the manufacturing and processing enterprises in Woosang Country are finishing enterprises. For example, the long-term monopoly of bearing companies!

"Which country has it?" Shi Lei asked without hesitation, as long as other countries have it, Shi Lei will have a way to get it!

To borrow a classic language: In this world, money is not everything, but money can solve all kinds of problems.

As long as Shi Lei is willing to spend money, even if the laser processing equipment is an embargoed product, he must be able to enter the Xia Kingdom!

.

ps: ps: Apple, have you changed your number?