Chapter 81 Working (Part 1)

Shi Xinwager's stalk was an agreement that Zhao Yanyan and Guo Tailai joked about last time. Unexpectedly, Guo Tailai still remembered it firmly, and Zhao Yanyan laughed again: "Okay, I'm waiting for the day when I will be your girlfriend."

Seeing Zhao Yanyan showing the same smile as in school again, Guo Tailai was also happy for a while. When I saw Zhao Yanyan in the afternoon, she didn't have such a bright smile in school, and she didn't know how much wronged she had suffered at work.

But it shouldn't be, Zhao Yanyan's family background is so good, who would dare to give her small shoes? Guo Tailai shook his head, how is it possible? It is probably a design problem, Zhao Yanyan is a bit too competitive and pursues perfection, that's why she feels uncomfortable.

Zhao Yanyan can fully accept Guo Tailai's explanation. As the saying goes, physical strength is not a loss. Guo Tailai is a big man, and he also does heavy physical work and exercise every day, so it is strange that he has little strength.

Because of this, Zhao Yanyan watched with peace of mind that Guo Tailai moved the raw materials that needed to be transported to the trolley, and then pushed them all the way to the workshop.

Some things are easy to do, and can be finished in one click. There are the latest 5-micron machine tools here, but Guo Tailai chose mechanical lathes. He has not fully mastered the usage of these new CNCs, and mechanical lathes are the easiest to use.

As for the precision, Guo Tailai can completely finish the car first and leave a small margin before polishing it by hand. Anyway, Guo Tailai now manually processes it to an accuracy of 0.5 microns, which is more than enough for Zhao Yanyan's design requirements. After all, not every component needs to reach the limit.

Zhao Yanyan was at a disadvantage because he didn't know how to operate these machines, and his hands-on ability was insufficient, so he had to find Guo Tailai.

Now it is not mass production, and Guo Tailai will not formulate any production procedures, as long as each part is produced at the fastest speed. Guo Tailai first practiced with the simplest parts, and at the same time was familiar with the performance of the machine.

Today I plan to make more than a dozen parts, and the lathe will make semi-finished products, and then go directly to the fitter's workbench. For some drilling jobs, Guo Tailai did not use a lathe, but planned to drill holes directly with a hand-held drill. This way of drilling, because Guo Tailai can flexibly change the direction of the hand-held, saves the time for installing various fixtures, which is better than using a drill on a lathe. Punching is more efficient.

Of course, only Guo Tailai can do this, his hands are stable enough, comparable to a machine.

During the period, Guo Tailai's lungs were itchy, and he went to the bathroom halfway to vomit black phlegm. Because Guo Tailai needed to process it, a large number of nano-robots were mobilized to control it. The number of nano-robots actually used to remove particulate matter from the lungs was reduced to only 100,000, and the speed was much slower.

After getting the nanorobot from Famen Temple and upgrading the system, there are two new functions, one is to improve the stability of muscle control, and the other is to increase the speed of muscle control behavior.

Improving the stability of muscle control is easy to understand, and Guo Tailai discovered the clue without polishing it himself. The hand is more stable, and the manual adjustment scale of the mechanical lathe is easy to handle. With the abnormal measurement accuracy of Guo Tailai's eyes, although the lathe is purely mechanical, it may only have an accuracy of 5 wires, but Guo Tailai's steady hand controls the feeding, and it can be accurate. to within 1 thread. If it is replaced by manual grinding, the accuracy may be higher than 0.5 microns.

Another increase in the speed of muscle control behavior was discovered after using the bench tool in person. Generally speaking, compared with the original speed of Guo Tailai's action, it was directly doubled. The sudden speed shocked even Guo Tailai himself, let alone Zhao Yanyan next to him.

"Fatty, don't rush so hard!" Zhao Yanyan thought it was Guo Tailai who felt that time was tight, so he took the initiative to speed up, and hurriedly warned: "It's a big deal to improve the engine next time."

"It's okay, I have a sense of proportion." After Guo Tailai found out that this was the benefit brought to him by the system upgrade, he immediately stopped worrying.

Nano-robots control muscle movement and repair muscle fibers torn by exercise at any time, so even though the fat man is still fat, his muscles are not bad at all. In fact, even if Guo Tailai does not use nano-robots to consume fat, the amount of exercise every month is enough to lose weight normally. That is to say, Guo Tailai didn't want his weight to drop too quickly. In the past few months, Guo Tailai's weight loss has been maintained at a rate of ten catties per month.

The joy of seeing Zhao Yanyan again, how can the fat man care about maintaining these things, why lose weight at a constant speed? How much damage can it do to your body? Isn't it possible to repair cells? If there is any damage, it will be repaired in time. Rapid exercise will accumulate lactic acid and cause muscle soreness? Nanobots can handle a large part of it, and it's no problem to take a day off during the day.

Seeing that Guo Tailai was full of energy and didn't have any particularly strenuous expression, Zhao Yanyan didn't say anything more, just stared at the side, and after Guo Tailai finished one thing, he would help me measure it.

In fact, in mechanical processing, there is an important factor that affects the processing speed, and that is measurement. It’s okay during rough machining, you can measure after one cut, anyway, the margin is enough. But when it comes to finishing machining, if necessary, one action will be measured at a time to avoid mistakes. It is true that the measurement time is longer than the processing time.

In Guo Tailai's body, there is no such situation of delaying and interrupting processing due to measurement. Guo Tailai makes all parts finely in one go.

Don't look at Guo Tailai as a fat man, but he is a flexible and fat man. Especially when he was processing the parts, the movements in his hands were continuous, yet precise as a laser rangefinder. Coupled with the confident light in his eyes, Zhao Yanyan, who had been watching from the side, couldn't help but be shocked. Attracted by fat people who work hard.

Unknowingly, Zhao Yanyan fell asleep amidst Guo Tailai's regular processing voice, even she didn't know how she fell asleep.

"Huh? Why did I fall asleep?" When she woke up, it was already seven o'clock in the morning, and Zhao Yanyan couldn't help being surprised.

In the research institute, Zhao Yanyan hasn't slept well recently, and would be awakened by the slightest sound. But today, Fatty was processing parts not far away. Although he didn't have a lathe, but the steel file and drill bits were ringing continuously, it was really strange that he could sleep so soundly.

Maybe it's because knowing that the fat man is not far away, I will unconsciously feel at ease! Zhao Yanyan sat up on the bench, only to realize that she was covered with a large coat, which size, needless to say, must be for a fat man.

When looking at Guo Tailai again, Zhao Yanyan realized that Guo Tailai had packed everything up, even the processed debris was cleaned up, as if it was exactly the same as last night.

If he hadn't watched Guo Tailai work here for half a night, Zhao Yanyan wouldn't believe that someone had moved in the workshop at this moment. Or look at the electric meter to confirm that the lathe has been turned on!