Chapter 242 Copy Completed (Part 2)

"Assembly now?" Guo Tailai knew that Wan Ming was in a hurry, so he didn't procrastinate, and asked directly: "Should we dismantle those electronic systems first?"

"I'm going to disassemble those electronic systems." Wan Ming looked at Long Fei, and Long Fei also knew that at this time, there was no way to say that there was something wrong with the things Guo Tailai made, and he could only choose what he was good at.

"Then I'll assemble the engine first." Guo Tailai was not modest, and directly took over the job of assembling the engine.

To be honest, the assembly work was left to Long Fei, Guo Tailai didn't know what to do by himself? Long Fei doubted Guo Tailai's craftsmanship, and Guo Tailai would in turn doubt Long Fei's assembly ability!

Long Fei glanced at Guo Tailai, didn't say anything, and went directly to find tools to dismantle the two piles of wreckage.

Guo Tailai had long been familiar with the structure of the elliptical piston engine, so he greeted Long Fei to keep him out of the way, and quickly started to do it.

Except for the spark plug, basically all the spare parts of the engine are made by Guo Tailai himself, and there is no difficulty in assembling them. After just a few glances, Wan Ming no longer worried at all, and walked directly to Long Fei's side to help disassemble those lines.

Seeing Wan Ming approaching, Long Fei didn't care, but when he occasionally glanced at Guo Tailai, he was stunned.

Guo Tailai was holding a piston and installing it into the cylinder liner, but he didn't need any assistance or tools to tap, just holding the piston in his hand and inserting it.

Generally speaking, only stupefied youngsters would do this. After all, the direction of the cylinder is neither vertical nor horizontal. It is almost impossible to insert the piston smoothly at the same angle without relying on tools to align it. In fact, it was brutally assembled at the cost of compromising the precision of the cylinder and piston.

Guo Tailai actually used this trick, which made Long Fei's dissatisfaction with Guo Tailai even more extreme, he immediately stopped his work, and walked towards Guo Tailai's installation site. He had to warn this fat man that he couldn't use such a method even if he had great strength.

However, when he was two or three meters away from Guo Tailai, Long Fei saw a scene that he couldn't believe.

Holding the piston in his hand, Guo Tailai inserted it obliquely into the cylinder liner, without using any brute force at all, just aligned the angle, as if it was very easy, and slowly and smoothly inserted the piston into the cylinder liner.

Long Fei could see clearly that there was no sign of lubricating oil at all, but it was done so easily, it could only explain one point, that is, the diameter of the piston was smaller than that of the cylinder liner, which made it so effortless.

Just about to speak, but in the next scene, Long Fei tightly shut his mouth again, unable to utter a word.

After the piston is partially inserted, it has reached the end of the piston. When the end of the piston is flush with the opening of the cylinder liner, the two seem to become one in an instant, and the two parts that are shining with metal light have no gaps, as if they are a metal part.

Long Fei saw this scene very clearly. If he was someone who didn't understand, then such a short moment would not have any effect on him. But the problem is that Long Fei also understands it very well. He knows what it means in terms of processing two parts without any seam marks. That is the ultimate state that even his teacher may not be able to achieve.

Fatty is really a master, and he's still a master. For a moment, Long Fei wondered if Fatty had already made up his mind and just waited for today's performance, but this scene directly dispelled all his doubts.

Even if it is the original NR750 from Japan, it is impossible for the piston and the cylinder liner to fit so zero-error, not to mention that the holes in the metal materials are still there. Not to mention anything else, just looking at Fatty's straightforward and neat assembly method without any tools, Long Fei would never say that Guo Tailai's skills are not good enough against his conscience.

Seeing Fatty move so fast, Long Fei became a little anxious. Only now did he understand why Wan Ming said that day that he was not worried about Fatty at all, but worried about himself! Judging from this posture, Fatty can complete the installation in a few hours at most, but Long Fei knows it well, in a few hours, he may not even be able to dismantle the electronic systems on those wreckages.

The facts were as expected by Long Fei, even worse than what he expected.

As expected, Fatty finished the assembly very quickly, and the speed was more than twice as fast as Long Fei expected. Originally, he thought it would take Guo Tailai at least three or four hours to complete the installation, but in less than an hour, Guo Tailai completed the installation of the engine.

What's even more exaggerated is that Guo Tailai didn't seem to want to be idle, so he installed all the frame, handlebar, tire, shock absorber, fuel tank, seat, etc. in place, but it was not fastened. It seems that only the electronic system that Long Fei is in charge of is left, and after he completes the installation, everything is fastened, and then the test drive can be started.

It only took Guo Tailai two hours to finish all this. During this period of time, with the help of Wan Ming, Long Fei only dismantled less than one-third of the wreckage.

Guo Tailai didn't just sit around and wait, seeing that Long Fei and the others were still early, they directly started to assemble the second engine and the second car.

Long Fei next to him was stimulated, and the speed of his hands increased a lot. Finally, when Guo Tailai completed the second car, he also dismantled the wreckage of the first car and got the complete electronic system out.

After eating the lunch that Wan Ming went out to buy, there was nothing to do with Guo Tailai. After not sleeping all night, Guo Tailai took advantage of Long Fei's time when he was checking these electronic systems, and went back to his room and had a good sleep. When he woke up in the evening, Long Fei and Wan Ming had already started half of the installation on the car.

Long Fei's attitude was obviously much better than before, maybe during this period of time, he had checked the things Guo Tailai assembled. No way, I couldn't find a trace of flaws. On the contrary, it was the electronic system that he patted his chest to ensure that six lines had problems. Fortunately, it's just a circuit, not a chip, otherwise it would be a big trouble.

Guo Tai came to help, Long Fei gave up the main position without thinking, and took the initiative to help. Although this guy was a little convinced in his heart, he couldn't say it out of his mouth, he just expressed it in this way. Of course Guo Tailai didn't care about it, he just acted as the main assembly, and enjoyed the service of Long Fei's gracious delivery of wrench and screwdriver with peace of mind.

With the concerted efforts of the three, after an hour, all the lines were connected and the entire vehicle was assembled. Except for the parts purchased by Long Fei, which were of other colors, all the parts Guo Tailai made later were all metallic colors. Under the light, the car shone on the parking space of the repair shop.