Chapter 185: Tucao (Part 1)

Lu Zhiming pointed in the direction of the toilet speechlessly, then walked into the workshop to see the finished products made by Guo Tailai.

The middle-aged man who had the same idea as him entered the workshop one after the other, and then were stunned at the same time. Guo Tailai is done, where are the things?

Not on the table in the work room, not on the table next to it, and the floor is clean, and it seems that there is nothing there. Where is that thing?

"Sure enough, it's a mystery!" The middle-aged man sneered and mocked: "Go to the toilet? Run away!"

Lu Zhiming's heart moved suddenly, and he raised his hand to take the thin copper rod that Guo Tailai handed back to him in front of him. At one end of the copper rod, there is indeed a finely crafted gyroscope, but at the bottom of the gyroscope, there is still a trace of metal that has not been cut off and is connected with the copper rod. Obviously this shows that this is made of copper rods. , rather than brought in from outside.

This workshop only has some fitter tools and no welding tools, so this situation can only be like this.

The middle-aged man had just finished speaking, and before he could confront Zhao Xiangbei with a sneer, he saw the gyroscope, and the disdain on his face disappeared instantly, and an incredible look suddenly appeared in his eyes.

"He... how did he do it?" The middle-aged man couldn't help being shocked. The best craftsman he knew wanted to make such a small gyroscope, and every spare part had to be carefully polished. There will be waste products, and sometimes it will be scrapped after just a short breath, which makes people crazy.

But the little fat man obviously made all the spare parts at once, and even assembled them. Is he a monster? What's even more incredible is that he doesn't need to adjust the processing angle when processing? How is it possible that it is even processed on a copper rod?

Middle-aged people just think that the time is incredible, but Lu Zhiming knows how to do it. The gyroscope made by Guo Tailai has a much higher machining accuracy than the master craftsmen here. The surface roughness is directly mirror-level, and the assembly is also extremely precise. Just by looking at the appearance, the table outside I don't know where the more than a dozen gyroscopes are so beautiful.

Lu Zhiming came out silently, holding the thin copper rod in his hand, walked to Zhao Xiangbei, let Zhao Xiangbei take a look, and then turned to the old masters.

It has to be said that the trick of fixing the base of the gyroscope on the thin copper rod is simply a stroke of genius. No need for Guo Tailai to say anything more, everyone understands that this is absolutely impossible to order from abroad and bring it back as those people said before. came in. Talking about treachery and collaborating with the enemy is simply a joke.

In terms of eyesight, those old masters are much better than these people who are engaged in administration and management. With just one glance, a few old masters sighed in their hearts.

Master-level craftsmanship, they lost convincingly. I can't accept it! It takes one person an hour to make a complete gyroscope, and the material loss of the thin copper rod is almost no waste. That is to say, the parts made by him have a 100% yield rate. How can this compare?

At this moment, the old masters suddenly felt very tired. After a lifetime of hard work, they were not as good as a young man. It seems that the wave behind the Yangtze River is really pushing the wave ahead, a new generation replaces the old, the unit bought high-precision CNC, and recruited many college students. These people are really old and should be eliminated!

"No!" The middle-aged man who was so shocked in the workshop just now rushed out and shouted at everyone: "Didn't you say that he can make the smallest size gyroscope? Why is he doing the same thing as us?" size?"

The dejected masters were also taken aback, even Zhao Xiangbei was stunned. That's right, hasn't Guo Tailai always been able to make the smallest size gyroscope? Why didn't you do it? Is it really impossible?

"Brother Lu, turn the copper rod over." Not far away, Guo Tailai had already come out of the toilet, and while exaggeratingly shaking his freshly washed hands, he casually said to Lu Zhiming.

Without further ado, Lu Zhiming turned the other end of the copper rod up. This time, even Lu Zhiming, who knew Guo Tailai was very good, was stunned.

This end of the copper rod, like the other end, is also connected to the base of the gyroscope. However, there are not one gyroscopes connected to this end, but ten. Arranged in threes, fours, and threes, each one is the smallest size, neatly arranged. Not only that, even the direction of the spinning top is exactly the same after assembly. This is purely handmade. How do you do it?

When the master masters saw this end, their eyes straightened, wishing they could pounce on it and snatch it from Lu Zhiming's hand. How did this guy do it? How is it possible to achieve such a small size with such high precision? What was used to polish the surface roughness?

"Is this polished using the method of "Liquid Abrasive Deburring of Micro Precision Parts" mentioned in the latest issue of "Mechanical Craftsman"?" One of the master craftsmen suddenly raised his head and asked Guo Tailai who was walking over.

"Eh?" Guo Tailai was taken aback by this question, and then looked at Zhao Xiangbei in doubt. Didn't it mean that these masters don't like CNC and don't learn it, so they will be eliminated? How can I pay attention to the latest technical journals?

Zhao Xiangbei was also puzzled for a while, but he remained calm. Guo Tailai didn't understand why, but he still turned around and replied with a smile: "Master, this is my unique method. No one else can do it. Ordinary people don't have this stability."

It turns out that it is a unique method, or the basic skill of stability, so there is no way. The old master sighed and didn't ask any more questions.

The ten smallest-sized gyroscopes finally drove the middle-aged man to a dead end. Seeing that several old masters had already shaken their heads and sighed, he looked at a few managements who supported him, but they were just devastated, and no one could make a point. Constructive comments to come.

Do you just admit defeat? Just retreat to the second line? The middle-aged man gritted his teeth, no! It's hard to manage to this position, and the daughter-in-law has become a mother-in-law for many years. Zhao Xiangbei and the others actually want to change the management rules and give young people a chance? How can this be?

"It looks like it, isn't it a lie if you can't use it?" The middle-aged man's eyes were red, staring at Zhao Xiangbei, and said this doubtful sentence.

"Fatty, take it down and test it on the spot." Zhao Xiangbei said to Guo Tailai without even looking at the middle-aged man.

Guo Tailai stepped forward, took the copper stick from Lu Zhiming's hand, stretched out his hand and flicked lightly beside the big gyroscope, and the gyroscope fell directly on Lu Zhiming's open hand.

"Be careful, such a precise gyroscope!" The old master who had just asked the question stopped with a distressed expression.

"Don't worry, master, this will still work when it is put on a rocket to launch." Turning the other end of the copper rod, Guo Tailai fiddled with his fingers, and all ten gyroscopes fell down lightly: "Such a little vibration, there is no problem." questionable."