Chapter 177 A Genius Comparable to Steve Jobs!

Flint raised his eyebrows and couldn't help looking at Harry Osborn:

"Spider-Man, did he offend you?"

He felt that it was understandable that Harry killed Osborn's high-level officials.

after all--

Harry Osborn has just inherited the business, and there must be a lot of people in the way to stop it.

So, these people have to be cleaned up.

As for killing Spider-Man, he didn't expect it at all.

Spider-Man, as a superhero in Queens, usually fights criminals.

Even, I have played against him a few times.

The two sides are basically tied!

Osborn Enterprises is second only to Stark Industries as a large-scale enterprise.

Most of the business are biological and military projects, how can it be related to Spider-Man?

What's more, Spider-Man also helped Osborn deal with Professor Connors who tried to turn all New York into Lizardmen.

It has helped Osborne Enterprises.

If Connors is really successful, then Osborne Enterprises may also face a severe investigation!

There was a hint of madness in Harry's eyes:

"You know, I'm dying, only Spider-Man's blood can save me!"

"However, it was desperate, and it refused to give me even a drop of blood."

"There are also those self-righteous executives of Osborne's business. In order to restore the confidence of investors, they even stopped the project that my father has been working on for 30 years. This project may have a cure for my blood disease."

"All my hopes for survival have been destroyed by this group of people. You said, should these people die?!"

"As long as you help me control these high-level executives and force them to sign an equity transfer agreement to give me absolute control of the company, then, as promised, I will give you enough money to treat your daughter, and even let you and your daughter complete the procedures for going abroad. "

"Trust me, the money I give you is enough for you to spend your whole life!"

Flint's expression remained indifferent:

"Spider-Man moves unpredictably, how can we lure him over?"

"I have to be in a special position with a lot of sand to maximize my abilities, otherwise, I can't be sure that I can kill Spider-Man!"

In Harry's eyes, a cold light flashed:

"You go to kidnap a person. This person's name is Gwen Stacy. As long as she is kidnapped, Spider-Man will naturally come to you."

He knew that Gwen was the girlfriend of his good friend Peter Parker.

Peter Parker, familiar with Spider-Man again.

Then, as long as Peter's girlfriend is kidnapped, Peter will naturally ask Spider-Man to save people!

With the character of Spider-Man, he will definitely take action at that time!

Flint heard the words and nodded slightly:

"Okay, I promise you!"

Harry then said excitedly:

"Well, but don't worry, I have to plan again,

Strive to destroy all these high-level leaders in one breath! "

...

the other side.

After adjusting the parameters of all the equipment, Lu Cheng finally started to make the 3D printer.

Because the main raw material of ink benzene tin has been produced.

The rest is to make some special alloys.

Lu Cheng intends to make isotopes of vibrating gold to replace ordinary alloys.

In this way, the performance of 3D printers will also be upgraded to a higher level.

The process of making a 3D printer is rather cumbersome.

Fortunately, during this time, Rosalie also found some engineers and materials experts for herself.

Under the temptation of high salary, these talents are naturally willing to join Chengxi Technology!

No one can live with money.

Lu Cheng first showed them the modeling drawing of the 3D printer, and then asked them to make it according to the steps on the drawing.

The process is very cumbersome, but for these talents, it is not too difficult.

It is nothing more than plate making, revision, stamping, sanding, polishing and other steps!

Seeing that these high-end talents are starting to work in full swing, Lu Cheng is hardly relieved.

Occasionally come back and watch the progress of making the 3D printer.

Just like that, half a month passed in a flash.

Chengxi Technology's first 3D printer was officially completed!

Lu Cheng ran the test himself, found various modeling drawings on the Internet, and imported them into the 3D printer.

As long as the material is placed in a fixed position, the finished product can quickly be printed exactly the same by the 3D printer.

Exactly!

These recruited experts couldn't help but be amazed when they saw this magical scene!

"My God, what kind of black technology is this?!"

"I think this material is mainly ink, benzene, tin and some special alloys. Why can the modeling be printed so perfectly?!"

"Yeah, it's incredible!"

Lu Cheng smiled and explained a little:

"Inside the 3D printer, there is a vacuum area. Once the modeling drawings are imported, the program will run automatically, allowing the vacuum area to change its position and shape to print the finished product."

This vacuum area is the core function of a 3D printer.

The whole process is completed by Lu Cheng.

So, these experts don't know.

Lu Cheng doesn't mind revealing this information!

As a result, this 3D printer has already applied for a patent, so there is no need to worry about plagiarism.

Second, the vacuum area where the finished product is made requires a special program to activate, and only Lu Cheng knows the core code of the program.

So, even if they know the principles of 3D printers, there is no way to reproduce 3D printers!

Lu Cheng looked at the group of experts and said:

"Okay, I will announce all the development drawings of the 3D printer later. You can make it according to the above steps, and strive for the early mass production of the 3D printer. This is the key to the company's profitability in the future!"

A printer can only be produced in half a month, and the efficiency is still too low.

Lu Cheng wanted to make quick money to support his research on other new materials.

Then, the efficiency must be improved, and it will take at least five days to produce a 3D printer.

These tasks are naturally handed over to this group of experts.

after all--

Their monthly salary is more than 10,000 yuan, and they can't take the salary for nothing!

After arranging everyone's affairs.

Lu Cheng left the factory and came to the office building of Chengxi Technology.

Chengxi Technology's factory and office building are separate, but not too far, only a few kilometers.

Lu Cheng is not as arrogant as Stark, and directly owns an office area in a building.

He just rented the first floor of the office building.

The entire office area is only five or six hundred square meters.

After this period of development, Rosalie has initially set up the company.

However, there are relatively few departments, only four departments: sales department, operation department, after-sales department, and finance department.

Lu Cheng came to the president's office and found Rosalie who was busy!

Company start-up.

Lu Cheng has become a hands-off shopkeeper again and is only responsible for product development.

Therefore, Rosalie handles all matters of the company, both big and small, which is a lot of hard work.

"Boss!" Rosalie smiled when she saw Lu Cheng coming over, "Why are you free to come here today, it seems that the day to report on the progress of the work has not yet arrived."

Lu Cheng found an office chair and sat down, and said:

"This time I came here mainly because I want you to arrange the promotion here."

Although the effect of 3D printers is unbelievable, if no one knows about it, there will be no sales.

Therefore, promotion is a very important part.

Rosalie looked a little surprised:

"Boss, has your new material been made so soon?"

Although she is a layman in the material industry, she also knew in the past that a new type of material needs to go through a lot of tests before it is put into production and then processed into finished products before it can be officially launched!

This process, at least half a year to a year!

However--

The company has only been established for over a month now.

How could the finished product be made so quickly?

Lu Cheng explained:

"It's not a new material, it's a new product I developed called a 3D printer."

"Whether the company can make a profit in the future depends on it!"

Rosalie was stunned.

She knew that the material field was simply not suitable for startups, let alone making money.

But can new products make money?

She is worried about it!

After all, the printer market is now basically saturated and occupied by various large enterprises.

For a start-up company, it is undoubtedly harder than reaching the sky to get a piece of the pie from these large enterprises!

No matter how good the quality of this printer is, it is difficult to seize the market.

Others are fighting a price war, which is enough to crush the company!

She knew that there were only about 25 million left in the company's account now.

Can't afford too much splurge at all.

Lu Cheng saw Rosalie's worry and said with a smile:

"Don't worry, my 3D printer is not the same as a normal printer, you'll soon find out."

After a while.

A group of workers moved the 3D printer to the president's office.

Lu Cheng quickly connected to the computer, then found a modeling drawing and imported it into the 3D printer.

The printer was up and running quickly, and in a few moments, a beautiful piece of jewelry was printed!

Seeing this, Rosalie's eyes were full of wonder:

"OMG, amazing, boss, how is this done?"

This is amazing too!

He saw with his own eyes that an unremarkable ore was polished into a beautiful gem in the blink of an eye!

Moreover, it seems to be exactly the same as the modeling drawing, which is simply a perfect replica!

It's not a printer at all, it's a magic machine.

Lu Cheng smiled:

"You don't have to care how to do it, you just need to know that as long as you have modeling drawings and raw materials, this printer can perfectly reproduce the finished product."

"This printer can be applied to various fields including aviation, jewelry, real estate, automobiles, etc. The prospects are still very good!"

"I can give you a budget of five million, promote it, contact some well-known bloggers and advertisers, and see if I can promote the product as soon as possible!"

"Of course, this 3D printer is mainly aimed at the high-end market, such as large enterprises, state agencies, etc., so try not to be too low in advertising, and make it a little taller."

"I'll leave the promotion work to you. I will try to open the market as soon as possible and find a partner!"

There are 3D printers that are ahead of their time here.

Lu Cheng is not worried that he can't find customers to buy!

At least, some aerospace companies, in order to ensure the precision of the equipment, will purchase 3D printers for processing.

Of course, the premise is that the 3D printer can guarantee the accuracy!

"Boss, don't worry, I believe many large enterprises will be interested in this magical device." Rosalie nodded excitedly.

He has management experience in a number of large enterprises, and he also has a certain network of contacts.

As long as the renderings of the 3D printer and the brochures showing the functions are made, I believe many bosses will be interested.

As long as the company can make money, he owns 5% of the company's equity, and his worth will naturally rise.

Rosalie asked:

"Boss, what is the appropriate price for a 3D printer?"

If the price is ridiculously high, it will undoubtedly lose a lot of the market.

It must be moderate, neither high nor low, in order to attract more customers.

Lu Cheng thought about the cost and his monopolized technology, and said:

"What do you think, three million one, how about one?"

"Of course, the company can also do additional customization to print larger finished products including cars, and of course, the price will be higher!"

Rosalie nodded:

"At this price, I believe many companies will be interested."

Three million is really not too high for some companies that really need 3D printers.

"Well, you can arrange other things yourself!" Lu Cheng nodded slightly, "I have something else to do, so I'll go first, you're busy!"

"Goodbye boss." Rosalie nodded.

She has long been accustomed to Lu Cheng's behavior of throwing his hands at the shopkeeper.

Before, she had some criticisms of Lu Cheng in her heart, thinking that Lu Cheng was here to burn money.

Now that she saw the magic of 3D printers, she realized how genius Lu Cheng is!

This kind of intelligence is comparable to Bill Gates and Jobs.

Once the 3D printer is available, it is enough to set off a new technological revolution!

Get out of the company.

Just as Lu Cheng was about to drive back to the Trident headquarters to punch a card, he showed his face.

He received a call from Mike:

"Lu, come back soon, another murder happened!"

Genius for a second to remember the address of this site: . Mobile version reading website: